How much oil does a 1.4 L Chevy Cruze take?
Approximately 4.2 quarts (4.0 liters) of engine oil are needed for a full oil change on most 1.4 L Chevy Cruze engines when the oil filter is replaced.
The exact capacity can vary by model year, market, and whether you replace the oil filter during the service. Always verify with the owner's manual or a trusted service guide and use the oil specification recommended for your vehicle.
Capacity and specifications for the 1.4 L engine
The 1.4 L turbo Ecotec engine used in the Cruze is commonly listed with an oil capacity around 4.2 quarts (4.0 liters) when performing a standard oil change that includes a new filter. This figure is a typical reference for many Cruze models, but it can differ slightly by year or region. When in doubt, rely on the official manual and the oil level dipstick to reach the correct fill.
Oil grade and climate considerations
Use Dexos1 Gen 2 engine oil that meets GM specifications. The usual viscosities are commonly 0W-20 or 5W-30, with the exact choice depending on your climate and year-specific recommendations. Always follow the grade listed in your owner's manual and local service guidance.
Checking the oil level and topping up
Park on level ground and turn off the engine. Allow it to rest for several minutes so the oil settles, then check the dipstick. Add oil in small increments, rechecking the level until it lies within the proper range. Avoid overfilling, which can cause engine problems.
Maintenance tips and quick notes
Keep a regular oil-change schedule based on the interval recommended in your manual, and use a legitimate oil filter when servicing. Market-specific requirements may apply, so always confirm the exact capacity and grade for your particular Cruze model.
Conclusion and quick takeaway
For most 1.4 L Chevy Cruze engines, plan for about 4.2 quarts (4.0 liters) of oil with the filter during an oil change. Verify the exact figure in your manual, use Dexos1 Gen 2 oil (typically 0W-20 or 5W-30 by climate), and check the level with the dipstick after servicing to ensure proper fill.
Summary
The 1.4 L Cruze generally requires around 4.2 quarts (4.0 liters) of engine oil for a full change with a new filter. Oil grade and precise capacity can vary by year and market, so consult the owner's manual and use a Dexos1 Gen 2 oil in the recommended viscosity for your conditions. Always verify with the dipstick and avoid overfilling.
