Loading

How much oil does a 1.8 liter engine take?

A typical 1.8-liter four-cylinder engine takes about 4.0–4.5 quarts (roughly 3.8–4.3 liters) of oil with a new filter. Exact capacity varies by engine family and model, so always check the owner's manual for your specific vehicle.


Understanding why the figure isn’t universal and knowing how to verify the exact specification for your car are essential for proper maintenance and avoiding under- or overfilling during an oil change.


What affects oil capacity?


Oil capacity is influenced by engine design, the size of the oil filter, and whether auxiliary components like oil coolers are part of the engine setup. The official capacity is listed for a full oil change with a new filter.


Engine design and internal oil routing


Different 1.8L engines may route oil differently, use varying bore spacings, and have different oil pan volumes, all of which can shift the total capacity by a fraction of a quart.


Oil filter size and accessories


A larger or aftermarket oil filter can add a small amount to the oil that needs to be held in the system, nudging the total capacity upward by a small margin.


Typical ranges for 1.8L engines


Below are typical ranges you might encounter across common 1.8-liter four-cylinder engines. The figures refer to oil capacity with a new filter installed.



  • Most 1.8L engines with a standard filter: roughly 4.0–4.5 quarts (3.8–4.3 liters).

  • Some variants with larger filters or additional oil capacity: up to about 4.8–5.0 quarts (4.5–4.7 liters).

  • Oil capacity without a new filter is typically about 0.2–0.3 quart less.


These ranges cover many mainstream 1.8L engines, but there are exceptions due to unique engineering or older designs. Always verify with your vehicle’s official specification.


How to confirm your exact capacity


To verify the precise capacity for your model, follow these steps.



  1. Consult the owner's manual or the manufacturer's official website for the exact specification tied to your engine code.

  2. Check the under-hood or service interval sticker, if present; it often lists the fill capacity for an oil change with filter.

  3. When in doubt, contact a dealership or a trusted mechanic with your VIN to obtain the exact figure.


Knowing the exact capacity helps prevent overfilling (which can cause foaming and pressure issues) or underfilling (which can reduce lubrication and protection).


Practical tips for changing oil in a 1.8L engine


In addition to knowing the capacity, consider these practical notes while performing an oil change.



  • Always use the manufacturer’s recommended oil grade and viscosity (for example, 5W-30 or 0W-20) as specified for your engine.

  • Factor in a new oil filter and a high-quality gasket for the drain plug to ensure a proper seal.

  • After adding the oil, run the engine briefly, then re-check the level with the dipstick and top up if necessary.


With the right capacity and the correct oil specification, your 1.8L engine will maintain optimal lubrication and performance.


Summary


The oil capacity for a 1.8-liter engine generally falls in the 4.0–4.5 quart range with a new filter, though some variants may require up to about 5.0 quarts. Always refer to your vehicle’s manual or official specifications to confirm the exact figure for your model, and follow proper change procedures to protect engine health.

How much oil does a 1.8 L Corolla take?


4.4 quarts
What is the Toyota Corolla Oil Capacity? The oil capacity of your Corolla will depend on which model year and configuration you picked from our inventory. As a general rule of thumb, the oil capacity for Toyota Corolla models equipped with 1.8L 4-cylinder engines is 4.4 quarts (4.2 liters) with the oil filter.



How many quarts of oil does a 2011 Chevy Cruze 1.8 L take?


Engine Oil
Capacity: 4.8 quarts (with filter).



How much oil do you put in a 1.8 L engine?


The Honda Civic with a 1.8L engine typically requires about 3.9 quarts (3.7 liters) of oil. Keeping up with regular oil changes is crucial for preventing engine wear and ensuring smooth operation.



How much oil does a 1.8 TSI take?


5.5L
Note: This engine requires 5.5L for an oil change. Please select carefully when choosing engine oil.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.