Loading

How much oil does a 1986 MR2 take?

A 1986 Toyota MR2 typically requires 3.9 quarts (3.7 liters) of engine oil. This is the standard oil capacity for the 1.6-liter inline-four engine found in the first-generation MR2 models. The exact oil capacity may vary slightly depending on the specific vehicle, but 3.9 quarts is the generally accepted amount needed to fill the engine oil system.


Detailed Overview


The Toyota MR2 was a mid-engine sports car produced from 1984 to 2007. The first-generation model, which was manufactured from 1984 to 1989, was powered by a 1.6-liter inline-four engine. This engine had an oil capacity of 3.9 quarts or 3.7 liters.


When performing an oil change on a 1986 MR2, it's important to use the correct amount of fresh engine oil to ensure proper lubrication and engine health. Overfilling the oil system can lead to issues such as oil leaks, increased oil consumption, and even damage to engine components.


Oil Change Procedure



  • Locate the oil drain plug, typically located at the bottom of the oil pan, and drain the old oil.

  • Replace the oil filter with a new one.

  • Pour in 3.9 quarts (3.7 liters) of the recommended engine oil grade, such as 5W-30 or 10W-30.

  • Start the engine and check for any leaks.

  • Allow the engine to run for a few minutes, then check the oil level using the dipstick.

  • Top up the oil if necessary, but do not overfill.


Following the proper oil change procedure and using the correct oil capacity for your 1986 MR2 will help ensure the longevity and optimal performance of your vehicle's engine.

How much oil does a Toyota MR2 3sge take?


4.2 L or 4.4 US Quarts according to the BGB.



How much oil does a 87 MR2 take?


Capacity: 3.6 quarts (with filter). After refill check oil level.



How much is a 1985 Toyota MR2 worth today?


The value of a 1985 Toyota MR2 Mk I can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $12,000 for a 1985 Toyota MR2 Mk I in good condition with average spec.



How much oil does a 3sge MR2 take?


You'll need about 4.5 litres.



How many quarts of oil does a Toyota 22r hold?


4.5 quarts (with filter). After refill check oil level.



What is the value of a 1986 Toyota MR2?


Typically, you can expect to pay around $12,000 for a 1986 Toyota MR2 Mk I in good condition with average spec. What is the highest selling price of a 1986 Toyota MR2 Mk I? The highest selling price of a 1986 Toyota MR2 Mk I at auction over the last three years was $32,287.



How much oil does a 1986 Toyota MR2 take?


The oil capacity of the engine is approximately 3.5 litres, but you will not need this much because you can never drain all the old oil.



How much oil does a Toyota MR2 take?


Capacity: 4.1 quarts (with filter). After refill check oil level.



Is Toyota MR2 a fast car?


At the test track, our supercharged MR2 turned in a 0-to-60-mph time of 6.5 seconds and ran the quarter-mile in 15.0 seconds at 91 mph. That's enough to hold off a Porsche 944S in the stoplight drags.



How much oil does a 1985 MR2 take?


Capacity: 3.5 quarts (with filter).


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.