How much oil does a 1990 Toyota Hilux take?
For a 1990 Toyota Hilux, the oil capacity depends on the engine installed. In a typical oil change with a new filter, plan for roughly five quarts (about 4.7 liters), but the exact amount varies by engine code.
Engine options in the 1990 Hilux
The Hilux lineup that year spanned gasoline and diesel powertrains. Capacities are given for common engine families; always verify against your VIN and the official manual.
Gasoline (petrol) engines
Gasoline options for the 1990 Hilux most often used the 2.4-liter 22R family in many markets. Oil capacity figures below assume replacing the filter.
- 2.4L petrol (22R) — about 4.7–5.0 quarts (4.5–4.8 L) of engine oil with a new filter.
Note: Other gasoline setups existed regionally; the 22R is representative of common 1990 pickups.
Diesel engines
Diesel Hilux variants included 2.0–2.4-liter 2L/2L-TE and 3.0-liter 3L families. Oil capacities vary by engine; the values below cover typical service fills with a new filter.
- 2.0–2.4L diesel (2L/2L-TE) — about 5.3–5.8 quarts (5.0–5.5 L) of oil with filter.
- 3.0L diesel (3L) — about 6.5–7.0 quarts (6.2–6.6 L) of oil with filter.
As always, consult your engine code to confirm the exact capacity, and note whether the fuel model uses turbocharging or other variants that may affect capacity.
What to do before you change the oil
Before attempting an oil change, identify your engine code (often stamped on the engine block or listed in the vehicle’s service documents). Gather the correct filter size and the right oil grade for your climate, and have a drain pan ready. The steps below assume you are performing a standard oil change with the engine warm and the vehicle safely supported.
- Warm the engine for several minutes to allow oil to drain more completely.
- Place a drain pan beneath the oil drain plug and remove the drain plug, letting oil flow out.
- Remove the old oil filter and install a new one, lubricating the gasket with a bit of new oil.
- Reinstall the drain plug and snug to manufacturer torque specifications.
- Pour in the recommended amount of new oil, using a funnel to prevent spills.
- Check the oil level with the dipstick and add more oil if necessary until the level is within the correct range.
Proper disposal of used oil and filters is essential; take them to an approved recycling facility or auto shop that accepts used oil.
Safety and disposal considerations
Dispose of used oil and filters responsibly. Wear eye protection and gloves, and ensure the vehicle is stabilized on a level surface before opening the hood or draining oil.
Summary
Oil capacity for a 1990 Toyota Hilux varies by engine. In most cases, plan for about five quarts (roughly 4.7 liters) for a standard oil change with a new filter, but check your engine code to confirm the exact amount. Petrol engines such as the 22R typically fall near 4.7–5.0 quarts, while diesel engines (2L/2L-TE and 3L) usually require more — roughly 5.3–5.8 quarts for 2L/2L-TE and 6.5–7.0 quarts for the 3L. Always rely on the official service manual for your exact configuration, and adjust for climate and oil filter size.
How much oil does a Toyota Hilux take?
Fill with up to 8 litres of premium engine oil.
How many quarts of oil does a 4.0 V6 hold?
The 4.0L V6 oil capacity varies by vehicle, but a common capacity is around 5.5 quarts, though some may need up to 6 quarts. For example, a 2015 Toyota Tacoma with a 4.0L V6 takes about 5.5 quarts for a 4WD model, while a 2007 Nissan Frontier 4.0L V6 takes about 6 quarts with a filter change. Always consult your owner's manual for the exact amount and type of oil required for your specific vehicle.
Oil capacity examples for 4.0L V6 engines
- Toyota Tacoma (2015): Around 5.5 quarts for 4WD models (5.5 quarts with filter).
- Nissan Frontier (2007): Around 6 quarts with a filter change.
- Jeep (engine specific): Around 6 quarts (5.68 L).
- Ford Ranger (2011): Around 5 quarts with a filter change.
How to find the correct capacity
- Check your owner's manual: This is the most reliable source for your specific make and model.
- Use a vehicle-specific online guide: Websites like AMSOIL or Blauparts have lookup tools to find the right oil and capacity for your car.
- Consult a professional: If you are unsure, a mechanic can provide the correct oil and capacity.
How many quarts of oil does a 1990 Toyota pickup take?
The oil capacity for a 1990 Toyota pickup with the 2.4L engine is 4.5 quarts (4.2 liters) with a filter change. For the 3.0L engine, the capacity is 4.5 quarts (4.2 liters) with a filter change. It is always important to check the oil level with the dipstick after refilling and top it off as needed.
| Engine | Capacity (with filter) |
|---|---|
| 2.4L 4-Cylinder | 4.5 quarts / 4.2 liters |
| 3.0L 6-Cylinder | 4.5 quarts / 4.2 liters |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_fuYlaeqONsyui-gPuMGOqAY_115';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
Note: Always check the oil level with the dipstick after filling and top off as needed.
What kind of oil does a 1990 Toyota take?
Full synthetic 10W-30 motor oil that is made with natural gas and designed to maximize engine protection.
