How much oil does a 2.0 HDi 136 take?
The 2.0 HDi 136 typically requires about 5.5 liters of engine oil for an oil-and-filter change, roughly 5.0 liters if you are not replacing the filter.
The amount can vary depending on the exact engine code, model year, and whether the oil filter is replaced during the service. The 2.0 HDi (DW10 family) spans several vehicle applications, so while 5.0–5.6 liters is a common guideline, always verify with your owner’s manual or service documentation for your specific vehicle.
What affects the oil capacity of a 2.0 HDi 136?
Oil capacity is not identical across all cars that use the 2.0 HDi 136. Differences in engine code, oil filter configuration, and whether additional filters or oil cooler lines are present can shift the total amount needed. Below are the typical ranges you may encounter.
- With the oil filter change: about 5.5–5.6 liters
- Without changing the oil filter: about 5.0 liters
In practice, aim near the upper end (around 5.5 liters) when performing an oil and filter change, and always top up gradually to reach the correct dipstick level after running the engine.
Practical guidance for checking and topping up oil
To ensure you fill to the proper level and avoid overfilling, follow standard procedure and consult your manual for any model-specific nuances.
- Prepare the correct oil grade and an appropriate quantity within the documented range.
- Drain the old oil and replace the oil filter if performing a complete change.
- Fill gradually, then run the engine to operating temperature and recheck the level with the dipstick.
- Top up in small increments until the dipstick reads within the recommended range.
Conclusion: While 5.5 liters is a solid working figure for many 2.0 HDi 136 engines during an oil and filter change, always confirm with the exact engine code and vehicle specification to prevent under- or overfilling.
Summary
The 2.0 HDi 136 commonly uses about 5.5 liters of engine oil for an oil-and-filter change and about 5.0 liters if you skip replacing the filter. Variations by engine code and vehicle make mean you should verify the exact capacity in your manual and use the dipstick to confirm proper oil level after refilling.
How much oil does a Peugeot 308 2.0 HDi take?
5.0-5.5 litres
Millers Oils Trident Professional C2/C3 5w30 engine oil x 6 litres (Millers lists 5.0-5.5 litres for this vehicle.
How much oil goes in a 2.0 L engine?
Honda Civic 2.0L Engine
For the Honda Civic equipped with a 2.0L engine, the oil capacity is around 4.4 quarts (4.2 liters). Regular oil changes with the appropriate oil type help maintain engine health and efficiency.
How much oil does a 2.0 Ecoblue take?
Capacities and Specifications - 2.0L EcoBlue
| Variant | Including the Oil Filter | Excluding the Oil Filter |
|---|---|---|
| All. | 1.7 gal (6.4 L) | 1.6 gal (6.2 L) |
What kind of oil does a Peugeot 2.0 HDi take?
Peugeot Expert 2.0 HDi 07-15 Fully Synthetic 5w30 Engine Oil For Service 5 Litre.
