How much oil does a 2013 Lexus ls460 4.6 take?
The 2013 Lexus LS460 with the 4.6-liter V8 uses about 6.4 quarts of engine oil, including the filter, for a standard oil change.
Understanding the spec
The LS460’s 4.6-liter V8 is typically identified by the engine code 1UR-FSE. Official oil capacity for this engine is listed at roughly 6.4 quarts (about 6.1 liters) when you perform a complete change and replace the oil filter. Small variations can occur depending on whether the filter is changed and how the draining process is performed, but 6.4 quarts is the commonly cited figure for a full service.
Oil type and best practices
Lexus generally recommends using a synthetic motor oil that meets or exceeds the ILSAC specification, with a common guideline of 5W-30 for this engine. After adding oil, allow it to settle, then check the level with the dipstick on a level surface and adjust to the full mark. Always refer to the owner’s manual for the exact specification and any climate-related adjustments.
Why the capacity figure matters
Knowing the correct oil capacity helps ensure you don’t overfill or underfill the engine, which can affect performance and longevity. For the 2013 LS460, using the stated capacity of about 6.4 quarts when performing a traditional oil change with a new filter helps guarantee proper lubrication right from startup.
Summary
The 2013 Lexus LS460 with the 4.6-liter V8 requires approximately 6.4 quarts (about 6.1 liters) of engine oil when performing a full oil change that includes replacing the filter. Use a synthetic 5W-30 oil and verify the level on the dipstick after the oil has settled, following the guidance in the owner’s manual.
