What size wiper blades for Honda CRV?
The front wiper blades on most Honda CR-V models are 26 inches on the driver’s side and 17 inches on the passenger side, with a 12-inch rear blade on most trims. Sizes can vary by year and market, so always confirm for your exact vehicle.
Current-generation CR-V (2017–present)
In the latest CR-Vs sold in the United States and most markets, the standard front blades are 26 inches (driver) and 17 inches (passenger), while the rear blade is 12 inches. This configuration covers the majority of vehicles in this generation, though some trims or markets may differ slightly.
Front and rear blade sizes
- Front driver-side blade: 26 inches
- Front passenger-side blade: 17 inches
- Rear blade: 12 inches
Conclusion: For 2017–present CR-Vs, you’ll most often need 26" and 17" front blades, plus a 12" rear blade. Always double-check using your vehicle’s manual or a trusted parts finder by year and trim.
Older CR-V generations (1997–2016)
Earlier generations of the CR-V used a mix of sizes, but many repeated the 26"/17" front configuration with a 12" rear blade. Because there were several design changes over nearly two decades, the exact lengths can vary by year and market. If you’re shopping for an older model, verify with the owner’s manual or an online fit guide before purchasing.
Common approach to sizes across older models
To simplify, many buyers used the following baseline, then checked for exceptions:
- Front driver-side blade: 26 inches
- Front passenger-side blade: 17 inches
- Rear blade: 12 inches
Conclusion: The 26"/17" front and 12" rear setup is common but not universal for older CR-Vs; verify for your exact year.
How to verify the correct size
Use one of these methods to lock in the exact blade size for your year and trim:
- Consult the owner's manual or sticker on the driver's side door jamb for blade length recommendations.
- Check the blade packaging or the replacement blade’s labeling for the included lengths.
- Enter your year, model, and trim into an automobile parts retailer’s fitment tool or the OEM’s site to pull up the correct sizes.
Conclusion: Regardless of generation, always verify with a reliable source to ensure the blades you buy fit perfectly on your CR-V.
How to measure or confirm if you can't find documentation
If you don’t have the manual handy, you can measure the blades you already have or compare with the replacement blades’ packaging. For the front blades, measure the length along the blade from the mounting point to the tip. For the rear blade, measure the single length from end to end. When replacing, you can also purchase a dual-blade or patch kit that includes both lengths recommended for the vehicle’s year and trim.
Summary
Most modern Honda CR-V models use 26" driver-side and 17" passenger-side front wipers, with a 12" rear blade. Older models commonly follow the same front sizes but can vary; the safest approach is to consult the owner's manual or an online fitment guide by year, make, and trim. Verifying ensures you buy the right length and avoid fit problems or streaking on the windshield.
