How much oil does a 2015 Chevy Express 3500 6.0 take?
About 6 quarts of engine oil are needed for a full change on the 2015 Express 3500 with the 6.0L V8. The exact amount you see on the dipstick can vary slightly depending on whether you replace the filter and how you measure, so always verify the level after filling.
Oil capacity for the 6.0L V8 in the Express 3500
The engine’s oil capacity for a complete drain-and-fill with a new filter is roughly 6 quarts. In practice, the reading on the dipstick may appear around 5.7 quarts depending on measurement and whether the filter is replaced during the change. Always confirm with the dipstick after adding oil and running the engine.
Key capacity details:
- Oil capacity with a new filter: 6 quarts.
After completing an oil change, run the engine for a minute or two, turn it off, let the oil settle, and then recheck the level with the dipstick to ensure it lies within the recommended range.
Recommended oil and specifications
Use a GM Dexos1-approved engine oil, typically 5W-30, unless your owner's manual specifies a different grade. Always verify with the vehicle’s under-hood label or the manual for the exact spec.
Practical tips for the oil change
Prepare a clean workspace and a drain pan, replace the oil filter with a new one, and torque the drain plug to the specified value. Warming the engine helps drain oil more completely, and ensure proper disposal of used oil and the old filter.
Summary
The 2015 Chevy Express 3500 with the 6.0L V8 typically requires about 6 quarts of engine oil for a full change with a new filter. Always verify the final level with the dipstick after adding oil and running the engine, and follow GM specifications for oil type (usually Dexos1-approved 5W-30).
