How much oil does a 2024 Acura MDX take?
The 2024 Acura MDX uses different oil capacities depending on the engine. The standard 3.5-liter V6 version typically requires about 5.5 quarts of engine oil with the filter, while the high-performance MDX Type S with a 3.0-liter twin-turbo V6 needs around 6.0 quarts. Always verify the exact figure for your specific model in the owner's manual or on the under-hood oil fill label.
Engine options for the 2024 MDX
The MDX lineup for 2024 continues to offer two main powertrains. The standard engine is a 3.5-liter V6, and the performance-oriented MDX Type S uses a 3.0-liter twin-turbo V6. Each has its own oil capacity specification.
Base engine: 3.5L V6
Estimated oil capacity with filter: roughly 5.5 quarts (about 5.2 liters). This figure includes the oil filter, which is typically changed at the same time as the oil.
Performance engine: 3.0L twin-turbo V6 (Type S)
Estimated oil capacity with filter: around 6.0 quarts (about 5.7 liters). As with the base engine, the filter is included in the capacity when you do a full drain-and-fill.
Oil capacity by engine
Because production changes and different oil filter sizes exist, it helps to see a simple breakdown. The following figures reflect common capacities for the 2024 MDX lineup.
- Base 3.5L V6: about 5.5 quarts (5.2 L) with filter
- MDX Type S 3.0L twin-turbo V6: about 6.0 quarts (5.7 L) with filter
Always confirm the exact capacity for your specific vehicle using the owner's manual or the oil fill cap label, as regional variations or model-year updates can affect the specification.
How to verify the exact capacity for your vehicle
Your exact oil capacity can vary by production date and market. The most reliable sources are the official owner’s manual, the maintenance schedule, or the information printed on the oil fill cap under the hood. If you’re unsure, contact a dealer service department with your VIN to obtain the precise figure for your trim and build date.
How to perform an oil change and check the level
To ensure you use the correct oil quantity and type, follow these general steps for a standard MDX oil change and level check. The steps help you avoid overfilling and ensure a proper oil level after service.
- Warm the engine to operating temperature, then shut it off and let the oil settle for a few minutes.
- Safely lift the vehicle if you’re changing the oil in a driveway or garage; use proper stands and wheel chocks.
- Drain the old oil from the drain plug and replace the drain washer; remove and replace the oil filter.
- Refill with the recommended oil capacity for your engine, using a funnel to minimize spills; add oil gradually and check the level with the dipstick or the vehicle’s electronic gauge.
- Start the engine, run for a minute, then check for leaks and recheck the oil level; top off if needed to reach the full mark.
Adhering to these steps helps ensure accurate oil quantity and prevents overfill, which can harm engine performance.
Summary
Oil capacity for the 2024 Acura MDX varies by engine. Expect about 5.5 quarts for the standard 3.5L V6 and around 6.0 quarts for the 3.0L turbo Type S. Always confirm with the owner’s manual or dealer for your exact trim and production date, and follow standard maintenance practices to keep the engine healthy.
Conclusion
The 2024 MDX offers two main engines with distinct oil capacities. Rely on official documentation for your exact trim and build date to ensure precise maintenance. Regularly checking oil level and quality remains essential for long-term reliability.
