How much oil does a 2024 Ford Transit 350 3.5 take?
The 2024 Ford Transit 350 with the 3.5 EcoBoost V6 requires about six quarts (5.7 liters) of engine oil when performing a standard oil change with a new filter. This figure can vary slightly depending on the exact configuration and filter size, so always check the owner’s manual or Ford’s official specifications for your VIN.
Engine overview and capacity context
The 2024 Transit 350 commonly uses Ford’s 3.5-liter EcoBoost V6 engine, paired with a 10-speed automatic transmission. For a typical oil change using a new filter, the official capacity is listed as roughly 6 quarts (5.7 liters). Variations can occur based on regional specs and filter design, so your manual or dealer documentation should be your final reference.
Oil capacity details for the 3.5 EcoBoost Transit 350
Before listing the exact figure, note the following capacity context:
- Oil capacity with a new filter: 6 quarts (5.7 liters)
In practice, plan for about six quarts of oil during a standard change with a fresh filter, but verify the exact amount for your specific vehicle configuration in the owner’s manual or via Ford’s official service data.
Oil type and service interval guidance
Ford generally prescribes full synthetic motor oil for the EcoBoost family. For the 3.5 EcoBoost in the Transit, common viscosities are 5W-20 or 5W-30, depending on climate and operating conditions. Typical service intervals for normal driving are around 10,000 miles (16,000 kilometers) or once a year, whichever comes first, though heavy-duty or commercial use can warrant more frequent changes. Always follow the exact recommendations in your owner’s manual for your VIN.
How to check and-top off oil safely
To ensure the engine stays properly lubricated between full changes, follow these steps:
- Park on level ground and let the engine cool for several minutes before checking the oil level.
- Locate and pull the dipstick, wipe it clean, reinsert fully, and pull it out again to read the level against the marked indicators.
- If the level is below the Full mark, add oil in small increments (about 1/2 quart at a time), then recheck.
- Use the oil type and viscosity specified by Ford for your climate and VIN; avoid mixing brands or viscosities.
After topping up, run the engine for a brief period, recheck the level, and ensure there are no leaks or abnormal readings. Proper oil level helps maintain engine protection and performance for the Transit in day-to-day commercial use.
Additional considerations for Transit 350 owners
Beyond capacity, consider following components during an oil-change cycle: replacing the oil filter with an OEM or equivalent filter, checking drain plug torque, and disposing of used oil properly. If you operate in extreme temperatures or under heavy cargo loads, more frequent changes may be advisable.
Summary
Summary: The 2024 Ford Transit 350 with the 3.5 EcoBoost engine generally requires about six quarts (5.7 liters) of engine oil for a standard oil change with a new filter. Confirm the exact capacity and oil specifications for your vehicle’s VIN in the owner’s manual or through an authorized Ford dealer, and align service intervals with your operating conditions to keep the Transit performing reliably.
