How much oil does a 22 BRZ take?
The 2022 Subaru BRZ, powered by the FA24 2.4-liter engine, requires about 5.0 quarts of engine oil with a filter change (roughly 4.7 liters).
This article reviews the official capacity for the 2022 BRZ, explains what that means for maintenance, and offers practical guidance on adding the right amount and type of oil. We focus on the FA24-powered BRZ used from the 2022 model year onward and highlight how to verify levels in practice.
Official oil capacity for the 2022 BRZ
The engine oil capacity, including the replacement of the oil filter, is specified as 5.0 quarts (4.7 liters) for the 2022 BRZ. This figure applies to the FA24 2.4-liter engine that powers the current generation of BRZ and its close relatives. After performing an oil change, always verify the level with the dipstick and top up gradually if needed to reach the correct mark.
Oil type and maintenance considerations
Use synthetic 0W-20 oil as recommended for the FA24 engine. Maintenance intervals for a typical BRZ are generally around 6,000 miles (about 10,000 kilometers) under normal driving conditions; heavier use or severe driving can warrant shorter intervals. Always consult the owner’s manual for the exact schedule and any climate-specific or region-specific recommendations.
Practical tips for topping up the oil
Before adding oil, allow the engine to cool slightly and check the current level with the dipstick. Add oil in small increments, recheck the level, and avoid overfilling, which can raise pressure and potentially cause leaks or other issues.
Where to confirm the exact specification
For the most precise amount tailored to your specific vehicle, consult the owner's manual section on Engine Oil or contact a Subaru dealership or certified service center. Documentation and service bulletins can confirm any model-year nuances or regional differences.
Summary
In summary, the 2022 BRZ takes about 5.0 quarts (4.7 liters) of engine oil with a filter change, using synthetic 0W-20 oil. Always verify the level after filling and follow the maintenance schedule in the owner’s manual to keep the FA24 2.4L engine in good condition.
How many quarts of oil does a 1.8 L engine take?
A 1.8-liter engine typically takes between 3.5 and 4.5 quarts (about 3.3 to 4.3 liters) of oil, but this can vary significantly by make and model. The exact amount depends on the specific vehicle, and you should always check the owner's manual for the precise capacity, including whether a filter change requires a different amount.
- Check your owner's manual: This is the most reliable source for the exact amount of oil needed for your specific car.
- Consult online resources: Use your car's year, make, and model to search for specific oil capacities on automotive websites or forums.
- Add and check: It's best to start by adding about 4 quarts (or 3.5 liters) and then check the dipstick to ensure it's at the correct level. You can add more oil gradually until the dipstick indicates it's full, but do not overfill.
- Factor in the filter: If you are changing the oil filter at the same time, you will likely need the higher end of the capacity range.
- Safety note: Always wait a few minutes after running the engine for the oil to settle before checking the dipstick, and never overfill the engine with oil.
How much oil does a 22 GR86 take?
5.3 quarts
How much oil does a 2022 Toyota GR86 take? A 2022 Toyota GR86 takes 5.3 quarts of oil.
How many quarts of oil does a 3.0 L V6 take?
A 3.0L V6 engine typically takes between 4.5 and 6.5 quarts of oil, but the exact amount depends on the specific vehicle make and model. For example, a 2006 Ford Fusion 3.0L V6 requires 6 quarts, while a 2001 Jaguar S-Type 3.0L V6 needs 6.5 quarts. Always check your vehicle's owner's manual for the precise capacity and oil viscosity requirements.
| Vehicle | Oil Capacity |
|---|---|
| 2012 Ford Escape 3.0L V6 | 6 quarts |
| 2006 Ford Fusion 3.0L V6 | 6 quarts |
| 2003 Ford Ranger 3.0L V6 | 4.5 quarts |
| 2001 Jaguar S-Type 3.0L V6 | 6.5 quarts |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_aNwladLqMMe6i-gP9MeBOQ_163';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
How many quarts of oil does a brz take?
The oil capacity for a Subaru BRZ depends on the model year, but common capacities are around 5.7 quarts with a filter for older 2.0L engines and 5.3 quarts with a filter for newer 2.4L engines. Always check the vehicle's owner's manual or the oil dipstick to confirm the exact capacity and level after refilling.
Oil capacity by model year
- 2.0L Engine (e.g., 2013-2020): Approximately 5.7 quarts with a new oil filter.
- 2.4L Engine (e.g., 2023+): Approximately 5.3 quarts with a new oil filter.
Important considerations
- After refilling: Always check the oil level with the dipstick after adding the new oil and after running the engine briefly to ensure it's at the correct level. Some owners report that the recommended 5.3 quarts can be slightly short, and an additional half-quart may be needed to reach the full mark, so it's best to add slowly and check the level.
- Oil filter: The specified capacity typically includes the oil filter, so it should be changed at the same time as the oil for an accurate measurement.
- Torque: The oil drain plug should be tightened to 31 ft-lbs for 2016 and 2023 models, and a new washer should be used.
- Oil type: The recommended viscosity for both engines is 0W-20 synthetic oil.
