How much oil does a 22 Ford Transit Connect take?
In most North American configurations, the 2022 Transit Connect with the 2.0-liter gasoline engine takes about 5 quarts (4.7 liters) of engine oil, including the filter, during a full change. European-market models with a 1.5-liter EcoBlue diesel typically require around 4.5–4.8 liters. Always verify the exact capacity for your vehicle in the owner's manual or on Ford's official documentation for your VIN.
Engine options and oil capacity
This section summarizes the two main engine configurations you’re likely to encounter in the 2022 Transit Connect and their typical oil capacities.
- 2.0L gasoline inline-4 (US-market): approximately 5 quarts (4.7 L) with a filter.
- 1.5L EcoBlue diesel (EU/other markets): approximately 4.8 liters with a filter.
Note: Capacity figures include the oil filter. If you are not performing a full change or if your maintenance service uses a different filter size, the amount may vary slightly.
Practical maintenance tips
To ensure you use the correct oil and capacity for your specific Transit Connect, follow these steps:
- Check your owner's manual for the exact oil capacity for your engine and market.
- Look at the engine oil fill cap and the dipstick for the recommended oil specification (grade and viscosity).
- When in doubt, contact a Ford dealer or a trusted mechanic with your VIN for precise figures.
Conclusion: The capacity depends on engine and market; US 2.0L gas around 5 quarts; EU diesel around 4.8 L. Always verify with official documentation for your VIN.
Summary
Summary: The 2022 Ford Transit Connect's oil capacity is engine-dependent. US-spec models with the 2.0-liter gasoline engine require about 5 quarts (4.7 liters) with a filter, while international EU-spec diesel versions require roughly 4.5–4.8 liters. Always confirm with the owner’s manual or Ford’s official resources for your exact vehicle.
