How much oil does a 7.3 excursion take?
The Ford Excursion with the 7.3L Power Stroke typically requires about 15 quarts (14.2 liters) of engine oil for a full oil change with a new filter.
Capacity and practical guidance
The 7.3L Power Stroke is commonly published with an oil capacity of 15 quarts when the filter is changed. Actual amounts can vary by model year and service procedure. Always verify the level with the dipstick after adding oil, and follow Ford's recommended oil grade for your climate and year.
When planning an oil service, consider the following typical quantities you may encounter:
- 15 quarts (14.2 L) of engine oil with a new filter during a standard full oil change.
Allow the oil to settle after pouring and recheck the level with the dipstick, topping up in small increments to reach the full mark.
Oil grade and maintenance tips
Use an oil that meets API diesel specifications and Ford's recommended grade for the 7.3L Power Stroke. In many regions, 15W-40 diesel oil is standard; in colder climates, synthetic blends such as 5W-40 may be preferred. Always verify the exact specification for your model year with the owner's manual or a Ford service center.
Summary
For most Excursions equipped with the 7.3L Power Stroke, plan on about 15 quarts (14.2 L) of engine oil for a full change with a new filter. Confirm the final level with the dipstick after filling, and follow the manual for the correct oil grade and change interval.
How many quarts of oil does a 7.3 excursion take?
15 quarts
Some important stats for 7.3 fluid capacity include: Engine oil: 15 quarts. Transfer case: 2.0 quarts.
How much oil does a 2000 Ford Excursion 7.3 diesel take?
The 2000 Ford Excursion with a 7.3L engine has an oil capacity of 15 quarts (14.2 liters) when replacing the oil and filter. It is important to add the new oil slowly, checking the dipstick and adding more as needed until the correct level is reached, and to replace the oil filter with every change.
- Total capacity: 15 quarts (14.2 liters) with a new filter.
- Recommendation: Check the oil level with the dipstick after refilling, adding oil slowly and checking again until the correct level is reached.
- Additional steps: For a complete oil change, it is recommended to replace the oil filter as well, and some users suggest pre-filling the new filter with oil to help reduce the time it takes for the oil pressure to build.
What kind of oil does a 1999 Ford f350 7.3 take?
The correct oil for a 1999 Ford F-350 with a 7.3L diesel engine is 15W-40 for most conditions, though 10W-30 is an option for colder weather, and 5W-40 synthetic can be used year-round for better cold-start performance. Ford recommends using its Motorcraft 15W-40 "Super Duty" oil. The 7.3L Powerstroke engine requires a high-quality diesel oil with a capacity of 15 quarts (14.2L) with the oil filter.
Recommended oil types
- 15W-40: Ford's most common recommendation for this engine, suitable for ambient temperatures above $10^{\circ}$F. Motorcraft 15W-40 is a specific option.
- 10W-30: Acceptable for temperatures between $-10^{\circ}$F and $90^{\circ}$F, with a preferred range of $-10^{\circ}$F to $30^{\circ}$F.
- 5W-40 (Synthetic): A good year-round option, especially in colder climates, for easier cold starts.
Key considerations
- Capacity: The engine holds 15 quarts (14.2L) with a new filter.
- Filter: Always use a high-quality filter, such as the Motorcraft FL-1995A.
- Additives: While not mandatory, some owners use additives like Hot Shots Secret Stiction Eliminator to address injector stiction, especially on older engines.
- Quality: Choose an oil specifically designed for diesel engines that meets the Ford guidelines, like those with API CG-4/SH ratings, as the 7.3L Powerstroke is a HEUI (Hydraulically Actuated Electronically Controlled Unit Injector) system.
What kind of oil does a 7.3 Excursion take?
However, for most 7.3 Powerstroke owners, 15W-40 is the go-to oil.
