How much oil does a Dodge Avenger 3.6 L take?
The Dodge Avenger 3.6L engine requires 5 quarts of oil for a standard oil change. This includes the oil filter replacement as well. The specific oil type and viscosity recommended by Dodge for the Avenger 3.6L is 5W-20 synthetic blend motor oil.
Detailed Oil Change Information for the Dodge Avenger 3.6L
The Dodge Avenger is a midsize sedan that was produced from 2008 to 2014. The 3.6L Pentastar V6 engine was an available option on higher trim levels of the Avenger. This engine requires regular oil changes to maintain optimal performance and longevity.
- Oil Capacity: 5 quarts (including filter)
- Oil Type: 5W-20 synthetic blend motor oil
- Oil Filter: Standard spin-on style filter
- Oil Change Interval: Every 5,000-7,500 miles or per the vehicle's maintenance schedule
It's important to use the recommended 5W-20 oil weight, as this helps ensure proper lubrication and protection for the Pentastar V6 engine. Consult your owner's manual or contact a Dodge dealership for the full maintenance schedule and oil change procedures for your specific Avenger model.
Tips for Performing an Oil Change on a Dodge Avenger 3.6L
- Park the vehicle on a level surface and apply the parking brake.
- Allow the engine to cool completely before beginning the oil change.
- Locate the oil drain plug, usually on the bottom of the oil pan, and place a drain pan underneath.
- Unscrew the drain plug and allow the old oil to fully drain out.
- Once drained, replace the drain plug and tighten it securely.
- Locate the oil filter, typically accessible from the top of the engine, and use an oil filter wrench to remove it.
- Apply a thin coat of new oil to the gasket of the new filter before screwing it on.
- Unscrew the oil fill cap and pour in 5 quarts of the recommended 5W-20 synthetic blend oil.
- Replace the oil fill cap and start the engine to circulate the new oil.
- Check the oil level using the dipstick and add more oil if necessary.
Following these steps will ensure your Dodge Avenger 3.6L engine receives the proper oil change service. Remember to dispose of the old oil and filter properly, and keep records of your maintenance history.
What oil does a Dodge 3.6 L take?
I have used Penzoil Platinum 5W-20 since taking delivery of my new 2016 SXT Plus Challenger. It meets the Dexos requirements and all other FCA specs, plus it's a full synthetic which is a higher grade than conventional oils.
How much oil does a Dodge Avenger 3.6 take?
Compare Motor Oil
Capacity: 5.9 quarts (with filter).
How many quarts of oil does a 3.6 L GM take?
6 quarts
The GMC Acadia oil capacity is 5 quarts for the 2.0L engine and 6 quarts for the 3.6L V6. You'll need to know the GMC Acadia oil capacity when you purchase the lubricant for doing your own oil changes in Lynnfield. Consult with your owner's manual to see what kind of oil GMC recommends for your specific SUV.
What is high mileage for a Dodge Avenger?
Mileage for the Dodge Avenger runs around 200,000 miles. Thus, high mileage for the car is anything at or after 150,000-160,000 miles. When the Dodge Avenger reaches this point in its life, it's much more likely to experience pricey issues that might make you rethink ownership.
How much oil does a 3.6 L V6 take?
5.9 quarts
How many quarts of oil does a V6 engine take?
Typically, engines need five to eight quarts of oil. However, the size of your engine can impact how much oil is required. For example, a 4-cylinder oil engine may require around five quarts of oil, whereas a 6-cylinder oil needs six quarts.
How much horsepower does a 3.6 L Dodge engine have?
305 HP
2022 Ram 1500 Engine Differences
| Engine Options | 3.6L V6 with eTorque | 5.7L HEMI® V8 |
|---|---|---|
| Horsepower | 305 HP | 395 HP |
| Torque | 269 lb.-ft. | 410 lb.-ft. |
| Towing | 7,730 lbs. | 11,610 lbs. |
| MPG (city/hwy) | 20 / 26 | 15 / 22 |
What is the life expectancy of a 3.6 L V6?
200,000 – 250,000
What is the Average Lifespan of a Jeep Wrangler Engine? ( Reddit Opinion Included )
| Jeep Wrangler Engine Variant | Engine Type | Average Lifespan (miles) |
|---|---|---|
| 3.6L V6 | 200,000 – 250,000 | |
| Wrangler JL | 2.0L I4 Turbo | 200,000 – 250,000 |
| 3.6L V6 | 200,000 – 250,000 | |
| Wrangler 392 | 6.4L V8 | 100,000 – 150,000 |
What is the specs of the 2011 Dodge Avenger engine 3.6 L V6?
A 3.6-liter V6 that makes 283 hp and 260 lb-ft of torque is standard on the Heat and is available as an option on the Lux. A six-speed automatic is the only available transmission for this engine. In Edmunds testing, an Avenger Lux V6 accelerated to 60 mph in just 6.7 seconds, a quick time for this class.
How many quarts does a Dodge Avenger take?
Up to 5 quarts.
