Loading

How much oil does a Dodge Nitro 4.0 L take?

The Dodge Nitro 4.0 L V6 typically requires about 5 quarts (approximately 4.7 liters) of engine oil when performing a full drain and filter replacement.


The Nitro’s 4.0 L V6 relies on this standard capacity, which can vary slightly by model year or by filter choice. For the exact amount and the recommended oil grade for your climate, consult the owner's manual or the under-hood oil specification label. Baseline oil grade is commonly 5W-30, with 5W-20 used in specific climates per manufacturer guidance.


Capacity overview


Before listing the standard figure, note that the following figure reflects the typical capacity when you perform a complete oil change with a new filter.



  • Oil capacity: 5 quarts (4.7 liters) with a new filter.


In practice, you should verify the final fill with the dipstick after the change and top off as needed to reach the full mark with the engine at rest and cold.


Additional considerations


Please be aware that if you do not replace the filter, the amount required to reach the correct level may be slightly less. Always confirm by checking the dipstick and following the vehicle’s service manual for year-specific guidance.


Oil grade guidance


Typical recommendations for the 4.0 L V6 Nitro are to use 5W-30 motor oil as a baseline. Some climates or model years may specify 5W-20; always adhere to the grade listed in your owner’s manual or on the under-hood specification label.


Summary


For a Dodge Nitro with the 4.0 L V6, plan to replace about 5 quarts (roughly 4.7 liters) of engine oil when performing a full drain and filter change, using the oil grade recommended by Chrysler for your climate. Always verify with the dipstick and consult the owner's manual for any year-specific variations.

Can you put 5W-30 in a Dodge Journey?


6 Liters Of German RAVENOL DXG 5w30 Motor Oil - Meets the Chrysler MS-6395 motor oil quality standard and viscosity required for the 3.6L Dodge Journey gasoline engine.



How many quarts of oil does a 4.0 L V6 take?


The 4.0L V6 oil capacity varies by vehicle, but a common capacity is around 5.5 quarts, though some may need up to 6 quarts. For example, a 2015 Toyota Tacoma with a 4.0L V6 takes about 5.5 quarts for a 4WD model, while a 2007 Nissan Frontier 4.0L V6 takes about 6 quarts with a filter change. Always consult your owner's manual for the exact amount and type of oil required for your specific vehicle. 
Oil capacity examples for 4.0L V6 engines

  • Toyota Tacoma (2015): Around 5.5 quarts for 4WD models (5.5 quarts with filter). 
  • Nissan Frontier (2007): Around 6 quarts with a filter change. 
  • Jeep (engine specific): Around 6 quarts (5.68 L). 
  • Ford Ranger (2011): Around 5 quarts with a filter change. 

How to find the correct capacity
  • Check your owner's manual: This is the most reliable source for your specific make and model. 
  • Use a vehicle-specific online guide: Websites like AMSOIL or Blauparts have lookup tools to find the right oil and capacity for your car. 
  • Consult a professional: If you are unsure, a mechanic can provide the correct oil and capacity. 



How much oil does a 4.0 Dodge Nitro take?


Oil Capacity 4.0 L (6.0 qt.) with dry filter Coolant Capacity 13.5 L (14.3 qt.)
PDF



What oil does a 2007 Dodge Nitro take?


The 2007 Dodge Nitro takes either SAE 5W-20 oil for its 3.7L V6 engine or SAE 10W-30 oil for its 4.0L V6 engine. Always consult your owner's manual to confirm the correct oil type for your specific engine and to determine the correct oil capacity. 

Engine Size Recommended Oil
3.7L V6 SAE 5W-20
4.0L V6 SAE 10W-30
(function(){
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_0-wlac68Ed22i-gPiO3kGA_112';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.