How much oil does a Dodge Nitro v6 take?
The Dodge Nitro’s V6 engines take about 5 quarts for the 3.7L and about 6 quarts for the 4.0L, both with an oil filter.
Engine options and oil capacity
Between 2007 and the final Nitro years, Dodge offered two V6 engine options. Oil capacity varies by engine, so it’s essential to use the figure that matches your specific powertrain. The figures below reflect typical capacities cited by service data and automotive references.
3.7L PowerTech V6
Oil capacity figures for this engine are listed below. The following item shows the standard capacity with a filter for a routine oil change.
- Oil capacity (with filter): about 5 quarts (4.7 liters)
Conclusion: For the 3.7L Nitro, plan for roughly 5 quarts during an oil change, plus a new filter.
4.0L Magnum V6
Oil capacity figures for this engine are listed below. The following item shows the standard capacity with a filter for a routine oil change.
- Oil capacity (with filter): about 6 quarts (5.7 liters)
Conclusion: For the 4.0L Nitro, plan for roughly 6 quarts during an oil change, plus a new filter.
Oil type and change tips
While capacity is a fixed figure, using the correct oil grade is important for engine wear and performance. Check your owner's manual for the recommended viscosity and specifications for your year and climate. In most cases, a modern multi-viscosity oil such as 5W-30 is commonly recommended, but always verify for your exact vehicle and location. Always replace the oil filter at the same time as the oil change.
Summary
Bottom line: The Dodge Nitro’s V6 engines require about 5 quarts of oil for the 3.7L PowerTech and about 6 quarts for the 4.0L Magnum, both with a new oil filter. Always confirm the exact capacity for your VIN and refer to the owner’s manual for the recommended oil grade and change interval.
How many quarts of oil does a 3.7 Dodge Nitro take?
5.0 qt.
Engine Speed 6000 rpm (electronically limited) Fuel Requirement Unleaded regular, 87 octane Oil Capacity 3.7 L (5.0 qt.) Coolant Capacity 13.25 L (14.0 qt.)
PDF
What kind of oil does a 2008 Dodge Nitro 3.7 take?
The correct oil for a 2008 Dodge Nitro with a 3.7L engine is SAE 5W-20. The vehicle requires approximately 5 quarts of oil when changing the filter. Both synthetic and conventional oils in the 5W-20 weight are compatible, but the owner's manual should always be consulted for the most accurate information.
- Oil Weight: SAE 5W-20
- Capacity: 5 quarts (with filter)
- Type: Can use synthetic or conventional oil, as long as it meets the 5W-20 specification. Some products also meet the API SP or ILSAC GF-6A specifications, as outlined by Advance Auto Parts and AutoZone.
- Recommendation: Always check your owner's manual for the most specific recommendation for your vehicle.
How much oil do you put in a 3.6 L V6?
The oil capacity for a 3.6L V6 engine is typically 5 to 6 quarts, but it varies by vehicle model and year. For a 2020 Dodge Charger, it's around 5.9 quarts, while a 2023 Jeep Wrangler requires 5 quarts. Newer Jeeps, such as the 2016-2021 Grand Cherokee and Durango, often require 6 quarts. Always check your specific owner's manual for the most accurate information, as it can differ even within the same engine family.
- 5 quarts: Common in many models like the 2020 Jeep Wrangler and 2025 Ram 1500.
- 5.9 quarts: The capacity for some models, such as the 2020 Dodge Charger.
- 6 quarts: Required for certain vehicles, including the 2013 JK Jeep Wrangler and some 2016-2021 Grand Cherokee and Durango models.
- Check your owner's manual: This is the most reliable source for your specific vehicle's oil capacity.
- After refilling: It's important to check the oil level with the dipstick after refilling to ensure it is correct.
How much oil does a 3.8 L v6 engine take?
A 3.8L V6 engine typically takes between 4.5 and 6 quarts of oil, depending on the specific vehicle and year. For example, a 1994-2004 Ford Mustang with a 3.8L V6 needs about 5 quarts, while a 2007-2011 Jeep Wrangler with a 3.8L V6 takes about 6 quarts. Always check your vehicle's owner's manual or consult a reliable source, like an oil capacity chart, to confirm the exact amount for your specific model, and always check the oil level with the dipstick after refilling.
Here are some examples of oil capacities for different vehicles with a 3.8L V6 engine:
- Ford Mustang (1994-2004): ~5 quarts
- Jeep Wrangler (2007-2011): ~6 quarts
- Pontiac Grand Prix (2008, 3800 V6): ~4.5 quarts
- Buick LeSabre (2000): ~7.4 quarts
