How much oil does a Ford Explorer 3.0 take?
The Ford Explorer 3.0 engine requires 5.7 quarts (5.4 liters) of oil for a full oil change. This includes the oil filter replacement. The specific oil type and viscosity recommended by Ford for the Explorer 3.0 is 5W-30 synthetic blend motor oil.
Detailed Oil Change Information for the Ford Explorer 3.0
The Ford Explorer is a popular midsize SUV that has been in production since 1990. The 3.0-liter V6 engine is one of the available engine options for the Explorer. When it comes time to change the oil in this vehicle, it's important to use the correct amount and type of oil to ensure proper lubrication and engine performance.
Oil Capacity for the Ford Explorer 3.0
According to the Ford owner's manual and service information, the oil capacity for the 3.0-liter V6 engine in the Ford Explorer is 5.7 quarts (5.4 liters) . This includes the oil filter, which should be replaced during each oil change.
Recommended Oil Type and Viscosity
Ford recommends using a 5W-30 synthetic blend motor oil for the 3.0-liter V6 engine in the Explorer . This oil viscosity provides the right balance of cold weather fluidity and hot weather protection for the engine. Using the correct oil type and viscosity is important for maintaining engine health and performance.
Oil Change Interval
- Ford recommends changing the oil and filter in the Explorer 3.0 every 7,500 miles or 12 months, whichever comes first.
- However, it's a good idea to check your owner's manual, as oil change intervals can vary based on driving conditions and the manufacturer's recommendations.
- Proper oil changes are essential for keeping the Explorer's engine running smoothly and preventing premature wear.
By following Ford's recommended oil capacity, oil type, and oil change interval, you can help ensure your Ford Explorer 3.0 engine receives the proper lubrication and maintenance it needs.
What kind of oil does a Ford Explorer 3.0 EcoBoost take?
SAE 5W-30
2020-2025 Explorer
3.0L EcoBoost V6 including ST: SAE 5W-30. Ford lists 0W-30 as an alternative for extreme cold in capacities pages.
How much oil does a 3.0 Explorer take?
6.0 qt
Materials
| Variant | Including the Oil Filter |
|---|---|
| All. | 6.0 qt (5.7 L) |
How much oil does a 3.0 L engine hold?
For most vehicles made between 2014 and 2019, the oil capacity is 10.5 quarts, while those made after 2020 have an 8.5-quart EcoDiesel oil capacity. The oil capacity will change slightly if you change the filter as well.
How many quarts of oil does a Ford 3.0 take?
The Ford 3.0L oil capacity varies by engine type, but most gasoline versions require around 6 quarts with a filter change, while the 3.0L Power Stroke diesel requires 6.5 quarts. It's crucial to check your specific vehicle's owner's manual or an online lookup tool to confirm the exact amount for your model year and engine, as older or different variants have different requirements, like the 1995-2006 V6 needing 5.5 quarts.
Gasoline engines
- Ford Explorer, Escape, Ranger: Many 3.0L V6 gasoline engines typically require 5.5 to 6 quarts when changing the oil and filter.
- Varies by year: Older engines, like the 1995-2006 V6, often have a capacity of 5.5 quarts.
- Check the manual: It is always best to consult your specific owner's manual or a lookup tool, such as the ones provided by AMSOIL, for the precise capacity and oil type.
Diesel engines
- Ford 3.0L Power Stroke: This engine has a capacity of 6.5 quarts (6.15 liters) of SAE 5w-30 diesel motor oil.
