How much oil does a Ford Transit 350 3.5 take?
The Ford Transit 350 with the 3.5-liter gasoline engine typically takes about 6 quarts (roughly 5.7 liters) of engine oil when performing a full oil change, including the oil filter. Always verify the exact specification for your specific vehicle year and configuration, but 6 quarts is the standard figure for most recent Transit 350 models equipped with the 3.5L EcoBoost V6.
What you need to know about the 3.5L engine and oil capacity
The 3.5-liter gasoline engine used in many Ford Transit 350 models is a high-output V6 that requires regular oil changes with the correct viscosity and capacity. While 6 quarts is the typical total fill for a complete oil change (oil plus filter), the exact amount can vary slightly by model year, engine variant, and whether you also replace the filter. Always consult your owner’s manual or the vehicle information on your VIN plate for the precise capacity.
Engine variants and capacity notes
In most current US-market Transits, the 3.5L EcoBoost V6 is the standard powerplant associated with the 350 series. For these engines, the standard oil capacity is around 6 quarts (5.7 liters) when a filter is changed. If you are working on a different engine variant or a regional specification, the capacity may differ slightly, so double-check the manual or service documentation for your exact VIN.
Recommended oil type and how to fill
Using the right oil type and filling to the correct level is essential for performance and longevity. Below is a quick guide to the typical recommendations for the Transit 350’s 3.5L engine.
- Oil capacity: Approximately 6 quarts (5.7 liters) with a new filter.
- Oil formulation: 5W-30 full synthetic or a high-quality synthetic blend, as specified in the owner's manual. Climate and operating conditions may influence the exact choice; check the manual for your region.
- Oil grade verification: Always confirm the correct viscosity and specification for your model year and VIN, as Ford sometimes updates recommendations.
- Dipstick check: After an oil change, run the engine briefly, shut off, wait a few minutes, then recheck the level to ensure it sits between the “Min” and “Max” marks on the dipstick.
Using the correct oil type helps maintain engine efficiency, reduces wear, and supports proper engine performance under heavy use—common in commercial van operations. If you’re topping up between changes, use the same viscosity and specification to avoid inconsistent performance.
Maintenance tips and best practices
Regular maintenance supports the oil’s protective role in the engine. Here are practical tips to ensure you’re keeping the oil system in good shape:
- Color and smell check: If the oil looks unusually dark or has a burnt smell, consider an earlier-than-scheduled change.
- Filter replacement: Always replace the oil filter with a new one during a full oil change to maintain filtration efficiency.
- Scheduled intervals: Follow Ford’s recommended oil-change intervals for your mileage and driving conditions; commercial use or extreme conditions can necessitate shorter intervals.
- VIN-specific guidance: If your Transit has unique specifications for a given year or market, follow the guidance tied to your VIN.
By sticking to the recommended capacity, oil type, and change intervals, you can help extend the life of the engine and reduce the risk of oil-related issues during demanding use cases common to fleet and cargo operations.
Model-year and regional differences
Ford occasionally updates engine specifications and oil recommendations by model year and market. While the 3.5L EcoBoost-equipped Transit 350 most commonly holds a 6-quart capacity with filter, variations can occur in different countries or for diesel-powered derivatives. Always confirm with the owner’s manual, service documentation, or a Ford dealership to get the exact specification for your vehicle’s year and regional version.
Summary
The Ford Transit 350 with the 3.5-liter gasoline engine generally requires about 6 quarts (5.7 liters) of engine oil for a complete oil change, including the filter. Use a 5W-30 full synthetic or high-quality synthetic-blend oil unless the manual specifies otherwise, and verify the exact capacity for your specific year and VIN. Regularly check the oil level, follow the recommended service intervals, and replace the filter with every oil change to maintain optimal engine health. For precise numbers tailored to your van, consult the owner’s manual or a Ford service advisor.
How much oil does a 2019 Ford Transit 350 3.5 take?
Engine Oil
Capacity: 5.9 quarts (with filter).
What kind of oil does a Ford Transit 350 3.5 take?
STP Full Synthetic Engine Oil 5W-30 5 Quart
5W-30.
How much oil does a Ford Transit 3.5 v6 take?
The oil capacity for a Ford Transit with a 3.5L engine varies significantly by model year and engine type: the 3.5L EcoBoost requires about 6 quarts (5.7 liters), while the later 3.5L non-EcoBoost (PFDI) engines require 12 quarts (11.3 liters). Always check your vehicle's owner's manual to confirm the exact capacity for your specific model and engine.
| Engine Type | Engine Code | Oil Capacity |
|---|---|---|
| 3.5L EcoBoost | - | 6 quarts / 5.7 liters |
| 3.5L PFDI (non-EcoBoost) | 8-998-O | 12 quarts / 11.3 liters |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_BdYlaYr6J5-ri-gPiofr4AE_193';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
Important considerations:
- Model Year: Ford made a change to the 3.5L PFDI engine for newer models, increasing the oil capacity to 12 quarts.
- Filter Type: Some capacities may vary slightly depending on the oil filter used, but the 12-quart capacity for the 3.5L PFDI engine is a widely cited figure for a service fill with the filter.
- Confirmation: It is crucial to verify the correct oil capacity in your vehicle's owner's manual to ensure you use the correct amount of oil.
How much oil does a Ford 3.5 L V6 hold?
The oil capacity for a Ford 3.5L engine is typically 6 quarts with a filter change, but it can vary by model and year. For some newer models, such as the 2023 Ford Transit, the capacity is significantly higher at 12 quarts. Always check your owner's manual or the vehicle's specifications to confirm the correct amount for your specific vehicle.
Oil capacity by model year and type
- Ford F-150 (most models): 6 quarts (with filter)
- This applies to many EcoBoost and standard 3.5L engines.
- Older models, such as a 2016 F-150, may list a capacity of 6.3 quarts.
- 2023-2025 Ford Transit: 12 quarts (with filter) for the 3.5L non-turbo PFDI engine.
- It's crucial to add the full 12 quarts to this specific engine, as some service centers may mistakenly add only 6 quarts based on older models.
- Ford Explorer: 6 quarts (with filter)
- Ford Component Sales (3.5L PFDI): 6.0 quarts
Important considerations
- Check your owner's manual: The most reliable source for your specific vehicle is its owner's manual, as capacities can change between model years and engine variants.
- Filter is included: The stated capacities usually assume you are replacing the oil filter as well.
- Follow proper filling procedure: After refilling, run the engine for a minute, then shut it off and wait about 15 minutes before checking the dipstick to get an accurate reading.
