How much oil does a Lexus 3.5 v6 take?
The engine typically requires about 6.4 quarts (6.1 liters) of engine oil for a full change, including a new filter.
The 3.5-liter V6 used in many Lexus models (the 2GR-FE family) follows a common capacity guideline. Exact amounts can vary by model year, trim, and oil filter choice, so it’s wise to confirm with the owner’s manual or service guide for your specific vehicle.
Oil capacity for the 2GR‑FE engine
The 3.5-liter V6 in numerous Lexus models uses the 2GR‑FE engine. For a standard drain-and-fill with a new oil filter, technicians generally use 6.4 quarts (6.1 liters) of oil.
Below is the capacity figure that applies to most 2GR‑FE applications. It refers to a full oil change including a new filter, with minor year-to-year variations possible.
Typical capacity figure for a complete oil change (with filter):
- 6.4 quarts (6.1 liters) of engine oil, including a new filter
Conclusion: Always verify the exact amount for your model/year in the owner's manual and use the dipstick to confirm the level after refilling.
What you’ll need for an oil change
Before you begin, gather the tools and materials you'll need to complete a full oil change cleanly and safely.
Typical items you'll need for a standard full oil change on a 3.5L Lexus V6 include:
- Correct oil viscosity for your model (common is 5W-30; check owner’s manual)
- New oil filter compatible with the 2GR‑FE
- About 6.4 quarts (6.1 liters) of oil for a full change with filter
- Drain pan, funnel, socket set, jack/ramps, gloves, and rags
Having the right filter and oil on hand helps ensure a smooth service.
Step-by-step oil change (drain and fill)
Follow these steps for a standard full oil change on a 3.5L Lexus V6. The steps assume the engine is warm and the vehicle is securely supported on a level surface.
- Warm up the engine briefly, then turn off and secure the vehicle on level ground.
- Place a drain pan under the oil pan and remove the drain plug to drain old oil completely.
- Remove the old oil filter and wipe the mounting surface clean.
- Install the new oil filter and lubricate its seal with a light coating of fresh oil.
- Reinstall the drain plug and tighten to the specified torque.
- Pour in the new oil gradually through a funnel, then check for leaks and monitor the level with the dipstick.
- Run the engine for a minute, turn off, wait a few minutes, and recheck the level; top off if necessary to reach the correct level.
Always follow the vehicle’s service manual and torque specifications for your exact model/year; if in doubt, consult a professional mechanic.
Model-year variation notes
While the 2GR‑FE is used across many Lexus models (IS, ES, RX, GS, etc.), some years or trims may show slight differences in oil capacity due to variations in filters or auxiliary systems. The 6.4-quart figure remains a reliable baseline for a full change on most 2GR‑FE engines.
Summary
For a typical full oil change on the Lexus 3.5L V6 (2GR‑FE), plan for about 6.4 quarts (6.1 liters) of engine oil with a new filter. Always verify the exact specification for your model/year in the owner's manual and confirm the level with the dipstick after refilling. Regular, correctly dosed oil changes support engine performance and longevity.
What kind of oil does a Lexus 3.5 take?
2022 Lexus RX350L 3.5L V6. - 6Quarts Genuine Full Synthetic LexusEngine Oil 0w20.
How many quarts of oil for a 3.5 l V6?
6 quarts
6 quarts (with filter). After refill check oil level.
How much oil does a 2017 Lexus 3.5 take?
Capacity: 5.7 quarts (with filter). W/O TT. After refill check oil level.
How much oil does a 3.5 L V6 Toyota engine take?
6.1 quarts
3.5L V6 Engine: 6.1 quarts with filter. 2.5L Hybrid Engine: 4.5 quarts with filter.
