How much oil does my 5.7 Toyota Tundra take?
Short answer: About 7 quarts (6.6 liters) of engine oil with a new filter; about 6 quarts (5.7 liters) if you’re draining and refilling without changing the filter. Always verify the exact capacity for your model year in the owner's manual.
In more detail, the 5.7-liter V8 used in recent Tundras is designed for an oil change that includes replacing the filter, which typically brings the total to roughly 7 quarts. The exact amount can vary slightly if your vehicle has additional equipment such as an oil cooler or if you’re not performing a full filter replacement. The figures below reflect common practice for the current generation.
Oil capacity specifics
The following figures assume a standard drain and replacement of the oil filter. If you did not replace the filter, the amount will be closer to the lower end.
- With filter replacement (full oil change): 7 quarts (6.6 L).
- Drain-only refill (no filter change): about 6 quarts (5.7 L).
These figures are typical for the 5.7L i-FORCE V8 used in recent Tundras. Always verify using the dipstick and your owner's manual, as variations can occur by model year or optional equipment.
Oil type and change interval
Before listing recommended oil types and maintenance intervals, note that the exact grade and schedule depend on climate, usage, and your owner's manual. The following guidelines are commonly used for the 5.7L Tundra.
- Oil grade: 0W-20 synthetic is commonly recommended for modern 5.7L i-FORCE engines; some climates may allow 5W-30. Refer to the owner’s manual for your region.
- Oil type: Use synthetic or full-synthetic-blend oil that meets Toyota specs (API SN/GF-6 or better). Some owners use full synthetic for extended intervals.
- Change interval: Typically every 10,000 miles (16,000 km) under normal driving with synthetic oil; more frequent (5,000–7,500 miles) in severe conditions (towing, extreme temps, dusty roads).
Always follow your vehicle’s maintenance schedule in the owner's manual and heed reminders from the information display, since real-world usage can shorten or extend intervals.
Summary
For a typical 5.7L Toyota Tundra, plan on about 7 quarts (6.6 L) of oil when doing a full change with a new filter, or roughly 6 quarts (5.7 L) if you’re draining and refilling without replacing the filter. Use the recommended viscosity (commonly synthetic 0W-20) and follow the manufacturer’s change interval for best engine health. Always consult the owner's manual for your exact year and configuration.
