How much oil does my F450 take?
The oil capacity of an F-450 varies by engine and year. In most common configurations, the diesel 6.7L Power Stroke takes about 15 quarts of oil (including the filter), the gasoline 7.3L Godzilla engine takes roughly 11–12 quarts, and older gasoline 6.8L V10 variants use around 6 quarts. Always confirm the exact figure for your specific truck and engine code.
Engine options and their oil capacities
The F-450 has different engines across generations, and each one has its own oil capacity. Here are the typical figures you’ll encounter on recent models.
- 6.7L Power Stroke Diesel (2011–present): Approximately 15 quarts (about 14–15 L) of engine oil, including the filter. Exact capacity can vary slightly by year and filter size.
- 7.3L Godzilla Gas V8 (2022–present): Roughly 11–12 quarts (about 10.5–11.5 L) with a filter; check your manual for the precise figure for your vehicle.
- 6.8L V10 Gas (older Super Duty variants): About 6 quarts (roughly 5.7–6.3 L) with a filter.
Note: Use the exact specification in your owner’s manual or Ford’s official data for your year, trim, and engine code, as capacities can vary with filter size and any factory changes.
How to confirm the exact capacity for your vehicle
To determine your vehicle’s precise oil capacity, follow these steps:
- Identify your engine code and model year from the driver’s door jamb sticker or your VIN decoding docs.
- Consult the owner’s manual or Ford’s official service data portal for your specific VIN to pull the exact oil capacity for your engine.
- If you’ve recently changed the oil filter or components, verify whether the capacity figure quoted includes the filter.
- When in doubt, contact a Ford dealer or a trusted shop to confirm the exact specification for your configuration.
Following these steps helps ensure you add the correct amount of oil and avoid under- or overfilling, which can affect lubrication and engine performance.
What oil type to use
Oil type is as important as quantity. For the diesel 6.7L Power Stroke, Ford typically calls for a high-quality full-synthetic diesel engine oil meeting WSS-M2C171-F1 (or newer). For the gasoline Godzilla 7.3L (and older 6.8L variants), use a high-quality full-synthetic gasoline engine oil meeting Ford’s spec (commonly 5W-30; some markets may require 5W-20). Always verify the exact viscosity and specification in your manual for your engine and year.
Summary
In short, the exact oil capacity of your Ford F-450 depends on the engine in your truck. The typical figures are about 15 quarts for the 6.7L Power Stroke diesel, 11–12 quarts for the 7.3L gas Godzilla, and around 6 quarts for older 6.8L V10s. Always confirm with your owner’s manual or the Ford service data for your specific VIN and engine code, use the recommended oil type, and check the dipstick after refilling to ensure proper level.
