How much does a 1947 Power Wagon weight?
In broad terms, a 1947 Dodge Power Wagon weighs about 5,000 to 5,500 pounds in curb weight, with a typical gross vehicle weight rating (GVWR) around 7,000 to 9,000 pounds depending on configuration.
The following article examines the weight characteristics of this early heavy-duty 4x4 pickup, which Dodge introduced just after World War II. We’ll review typical figures and explain what can shift a vehicle’s weight in this era, before outlining how to verify the exact figures for a specific truck.
Weight benchmarks for the 1947 Power Wagon
The figures below reflect common values for civilian Power Wagons from that year, noting that exact numbers depend on the specific build. Before presenting the numbers, it helps to know that variations arise from drivetrain options, cab and bed configurations, and any additional equipment.
- Curb weight: approximately 5,000–5,500 pounds (about 2,268–2,495 kg).
- Gross Vehicle Weight Rating (GVWR): approximately 7,000–9,000 pounds (3,175–4,082 kg).
- Payload capacity: roughly 1,800–2,000 pounds (800–900 kg).
These figures provide a general sense of the Power Wagon’s heft: enough to handle rugged work while delivering a workable payload for the era. Exact numbers vary with the specific configuration of the truck.
Configuration factors that influence weight
Several factors determine the precise weight of a given 1947 Power Wagon. The following considerations show how different choices can shift the scale.
Common configurations
- Engine and drivetrain: Variations in powertrain selection can add or subtract several hundred pounds.
- Cab and bed options: Different combinations of cab size and bed length affect curb weight and payload capacity.
- Optional equipment: Add-ons such as recovery gear, winches, heavy-duty axles, or PTO-driven accessories contribute additional weight.
For an exact figure, consult the specific vehicle’s data plate, build sheet, or archival documentation, as historical records show a range rather than a single fixed value for all 1947 Power Wagons.
How to verify the exact weight of a specific vehicle
To determine the precise weight of a particular 1947 Power Wagon, use a combination of official documentation and measurement. Helpful steps include checking the VIN/build sheet from Dodge’s records (where available), inspecting the vehicle’s data plate for GVWR and curb weight, and, if possible, weighing the truck on a certified scale. Restorations or replacements can alter weight, so recent modifications should be considered in any calculation.
Summary
The 1947 Dodge Power Wagon sits in a weight range typical of mid-century heavy-duty pickups: a curb weight around 5,000–5,500 pounds, with a GVWR often between 7,000 and 9,000 pounds and a payload of roughly 1,800–2,000 pounds. Exact weight depends on cab/bed configuration, drivetrain, and installed equipment. For precise figures, refer to the vehicle’s build documentation or weigh the specific truck.
