How much refrigerant does a 2016 Ford Explorer take?
The 2016 Ford Explorer requires 26.5 ounces (0.75 liters) of R-134a refrigerant to fully charge the air conditioning system. This amount is specified by the vehicle manufacturer and is the recommended refrigerant capacity for this model year and trim.
Detailed Breakdown
The Ford Explorer is a popular mid-size SUV that has been in production since the 1990s. For the 2016 model year, the recommended refrigerant charge for the air conditioning system is 26.5 ounces (0.75 liters) of R-134a refrigerant. This information can be found in the vehicle's owner's manual and service documentation.
R-134a is the standard refrigerant used in most automotive air conditioning systems, including the 2016 Ford Explorer. It is important to use the exact specified amount of refrigerant to ensure proper system performance and avoid potential damage. Overfilling or underfilling the system can lead to issues such as reduced cooling capacity, compressor failure, and refrigerant leaks.
Refrigerant Charging Process
To properly charge the air conditioning system in a 2016 Ford Explorer, the following steps should be followed:
- Ensure the system is completely evacuated of any existing refrigerant.
- Connect a refrigerant recovery/recycling/recharging machine to the vehicle's service ports.
- Slowly add the recommended 26.5 ounces (0.75 liters) of R-134a refrigerant to the system.
- Check the system pressure and temperature to verify the proper charge level has been reached.
- Perform a leak test to ensure there are no refrigerant leaks in the system.
It is important to follow the manufacturer's instructions and use the proper equipment to charge the air conditioning system. Attempting to recharge the system without the right tools and knowledge can lead to damage or improper operation.
How many gallons does it take to fill up a 2016 Ford Explorer?
Fuel & MPG
| Range in miles (city/hwy) | 297.6/427.8 mi. |
|---|---|
| Fuel tank capacity | 18.6 gal. |
How much gas does it take to fill up a Ford Explorer?
The 2021 Ford Explorer has a gas tank size of 20.2 gallons, depending on the Explorer model buyers get.
How much R-134A refrigerant is required?
All new compressors from Classic Auto Air contain a full system charge of oil. Do not use more than 24 oz. of 134A refrigerant! 1.5 lbs. or 24 oz of R134A is what is required.
Can I use 1234yf instead of 134a?
While R-1234yf could be the perfect replacement for R-134a, there is one major challenge with this new technology. The R-1234yf is much more reactive than R-134a. On the positive side, this higher reactivity is why R-1234yf is so much more friendly to the environment.
What kind of freon does a 2016 Ford Expedition take?
WARNING: The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury. Have the air conditioning refrigerant system serviced only by qualified personnel.
What freon does a 2016 Ford Explorer take?
1 All 1999 - 2016 Ford, Lincoln, and Mercury vehicles are equipped with R-134a refrigerant.
How many quarts does a 2016 Ford Explorer take?
Oil Grade: SEO18
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 6 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How much AC refill do I need?
According to PG&E, most central air conditioning systems use two to four pounds of refrigerant per ton of cooling capacity. A three-ton air conditioner would typically have six to 12 pounds of refrigerant for a proper charge.
How many oz of AC refrigerant does a car need?
(1) It depends on the car. Most cars will hold between 28 and 32 ounces of refrigerant (or about 2-3 12oz cans), however larger vehicles and those with rear A/C will likely hold more. Check your vehicle manual for proper system capacities.
How many 12 oz cans of freon equal a pound?
Weighing in at a 14.7 grams per can, you will need 32 cans per pound.
