How much torque does a 2010 Chevy Aveo rear axle nut have?

The 2010 Chevrolet Aveo is a front-wheel-drive vehicle, so there is no rear axle nut to torque. That particular specification does not apply to this model.

Drive layout explains the absence of a rear axle nut

In the Aveo, power is delivered to the front wheels through a transaxle with CV axles. The rear wheels are not driven, which means the hardware you would torque on a rear axle (if one existed) is not part of this car’s drivetrain. As a result, there is no rear axle nut specification for the Aveo.

What fasteners are actually involved with wheel work

For wheel-related maintenance, attention typically centers on the front axle outer CV axle nut and the wheel lug nuts. The torque values for these fasteners vary by engine and trim, so the exact numbers should come from the factory service manual or GM’s official repair databases. Always torque lug nuts to the manufacturer’s specification as part of a reassembly after wheel work.

Important note for DIYers

Because there is no rear axle nut on the 2010 Aveo, do not search for a rear-axle torque value. If you are performing maintenance on the front axle or brakes, rely on the official service information for the precise front axle nut torque and other related fastener specs for your specific vehicle configuration.

Where to find the exact specification

The most reliable source is the GM service information portal, Alldata, Mitchell1, or a certified repair database that lists the 2010 Aveo’s front axle nut torque and related fastener specs. If you’re unsure, consult a qualified technician to confirm the correct figures for your exact model (sedan or hatchback) and engine.

Summary: The 2010 Aveo has no rear axle nut to torque. Focus on front axle nut torque and wheel lug nut torque if you’re performing wheel or suspension work, and verify the exact numbers in official service materials.

What is the torque on the axle nut on a 2010 Chevy Equinox?

Axle nut torque: 151 ft-lb (205 Nm).

What is the torque spec for a rear axle nut?

There is no single torque specification for rear axle nuts; it varies widely by vehicle make, model, and axle type, with values ranging from 85 to over 300 foot-pounds. To find the correct specification, you must consult your vehicle's service manual or a specific torque chart for your model, as incorrect torque can lead to premature bearing failure. 
This video explains the importance of using the correct torque wrench for axle nuts: 37sBCA Bearings by NTNYouTube · Jan 9, 2020
Factors that influence the torque specification

• Bearing type: The design of the wheel bearing assembly is a major factor. Higher torque is often required for tapered roller bearings, while ball bearings typically have lower specifications. 
• Axle and hub design: Some systems require the axle nut to be torqued to set the bearing preload, while others have preload set during manufacturing and the nut's role is to hold the components together. 
• Vehicle specifications: The specific make, model, and year of your vehicle are critical. Even with the same bearing type, different vehicles will have unique torque requirements to ensure proper function and prevent issues like noise or misalignment. 
• Vehicle weight and driving conditions: The weight of the vehicle and its intended use can also affect the required torque. 

You can watch this video to learn about the importance of correct torque for front wheel hub units: 56sSKF Parts InfoYouTube · Jul 10, 2013
Where to find the correct specification

• Vehicle service manual: The most reliable source for your specific vehicle is its official service or repair manual. 
• Manufacturer publications: Some bearing manufacturers provide specific booklets or online databases with torque specifications for a wide range of vehicles. 
• Auto parts databases: Online databases or catalogs from auto parts suppliers often list the correct torque for specific parts you are purchasing. 

Why correct torque is critical

• Premature failure: Too loose a nut can lead to premature failure, while overtightening can cause excessive heat and pressure, also leading to failure. 
• Proper performance: Correct torque sets the bearing's preload, which is essential for the hub's longevity and performance. 
• Component alignment: Proper torque ensures proper alignment of components like rotors and backing plates. 

What is the torque on the axle nut on a 2012 Impala?

The 2012 Impala axle nut torque is 155 ft-lbs. Some sources recommend an additional step, such as tightening to 129 ft-lbs and then an additional 90 degrees to ensure proper preload, but the most common and direct value cited is 155 ft-lbs. 
You can watch this video to learn how to replace the front CV axle shaft: 46sTRQYouTube · Jul 20, 2022

• Torque: 155 ft-lbs (210 Nm). 
• Important Note: It's crucial to use a calibrated torque wrench for accuracy and a pry bar to hold the wheel stationary while torquing the nut. Over- or under-tightening can lead to premature wear or damage to the wheel bearing or axle. 

What is the torque on the axle nut on a 2011 Chevy Aveo?

2004-2011 Chevrolet Aveo 1.6L 4 Cyl. Notes: Wheel Bearing -- Wheel Bearing; Axle Nut Torque Spec: 221 ft-lbs / 300Nm.