How much transmission fluid does a 2007 Ford Freestyle take?
About 11 quarts (roughly 10.4 liters) is the typical total capacity for a full transmission refill on the 2007 Ford Freestyle. If you’re only performing a pan drain and refill, expect to replace about 4–6 quarts, since some fluid remains in the torque converter and cooler lines.
What transmission and capacity apply to the Freestyle
The 2007 Freestyle uses Ford’s 6-speed automatic transmission (the 6F35 family). The official capacity for a complete refill is about 11 quarts. Ford commonly specifies Mercon V or an equivalent Mercon V-compatible fluid for this transmission. Always confirm with the owner's manual or a dealer for your VIN, as revisions or service bulletins can affect recommendations.
Capacity breakdown
The following figures reflect typical quantities for a 2007 Freestyle with a 6F35-style automatic transmission. They help plan maintenance but your exact figures can vary with the model, service method, and fluid temperature.
- Total capacity (including filter and torque converter): about 11 quarts (approximately 10.4 liters)
- Pan drain-and-fill amount: roughly 4–6 quarts (about 3.8–5.7 liters)
- Full flush replacement (using a machine flush): typically about 9–12 quarts (about 8.5–11.4 liters)
These numbers assume a standard pan drain and fill or a professional flush. If the system has been modified or serviced differently, the amounts can vary. Always top up gradually and recheck the level with the transmission warm and idling in Park or Neutral as recommended by Ford.
Fluid specification and checking the level
Use Ford Mercon V or an equivalent that meets Ford specifications (for example, WSS-M2C924-A or later). Some aftermarket fluids labeled Mercon V are acceptable, but always verify compatibility for your VIN. After refilling, run through the gears and recheck the level with the vehicle warmed up and the engine running in Park.
How to check fluid level
Follow these steps to check transmission fluid after service for the Freestyle:
- With the engine at normal operating temperature, drive briefly to warm the transmission to operating temperature.
- Park on level ground with the engine running and the parking brake applied.
- With the transmission in Park, check the dipstick and compare to the recommended range; add fluid gradually if low.
- Recheck after a few minutes of idling in Park to ensure the level is within range.
Do not overfill. Excess transmission fluid can cause foaming, shifting issues, and leaks.
These steps help ensure the fluid level is correct and the transmission operates smoothly after servicing.
Where to buy and what to watch for
Purchase Mercon V or a Ford-qualified equivalent from reputable brands. Check the product meets the Ford specification for your vehicle and be mindful of the age of the fluid when buying. If you’re unsure about the exact capacity or fluid specification for your specific Freestyle (VIN-specific differences can exist), consult a dealer or a trusted auto shop.
Summary
The 2007 Ford Freestyle’s automatic transmission, typically a 6F35-series unit, holds about 11 quarts of fluid in total. A pan drain-and-fill will remove about 4–6 quarts, while a full flush can replace roughly 9–12 quarts. Use Mercon V or an equivalent, follow the service manual, and recheck the level when the fluid is warm to ensure proper operation.
What kind of transmission fluid does a 2007 Ford Freestyle take?
FRAM – Full Synthetic Continuously Variable Transmission (CVT) Fluid: 1 Quart (Part No. F490) FRAM FULL SYNTHETIC CVT Fluid is formulated with synthetic base stocks and a robust additive system designed to protect both chain and belt type continuously variable transmissions (CVT).
How much transmission fluid does a 2006 Ford Freestyle take?
The total automatic transmission fluid capacity for a 2006 Ford Freestyle is approximately 10.1 quarts for a complete fill, but a fluid and filter change only requires about 7 quarts, as some fluid remains in the torque converter and lines. It's important to use a fluid specifically designed for a Continuously Variable Transmission (CVT).
You can watch this video to learn how to change the transmission fluid and filter on a 2006 Ford Freestyle: 1mMinute MaintenanceYouTube · May 15, 2023
- Total capacity: Approximately 10.1 quarts (CFT30).
- Fluid for a service: About 7 quarts for a standard fluid and filter change.
- Fluid type: Must be a fluid compatible with a Continuously Variable Transmission (CVT). Check your owner's manual or an auto parts store to ensure you get the correct fluid.
How much is a transmission fluid change for a Ford Freestyle?
The average cost for a Ford Freestyle Transmission Fluid Change is between $375 and $478. Labor costs are estimated between $220 and $322 while parts are typically priced around $155. This range does not include taxes and fees, and does not factor in your unique location.
How many quarts of transmission fluid do I need for a drain and fill?
For a standard transmission fluid drain and fill, you'll typically need 3 to 5 quarts, but you should always measure the amount you drained and refill with the same amount to start, then check the level using the dipstick after running the engine. The exact amount varies by vehicle, and it's crucial to check the owner's manual or look up specifications for your specific make and model, as a drain and fill will not replace all the old fluid.
How to determine the right amount
- Drain the old fluid: Let the old fluid drain completely.
- Measure the drained fluid: Measure how much fluid was drained. This is your starting point for refilling.
- Refill with the measured amount: Put the same amount of new, correct transmission fluid back into the transmission. Using a funnel can help with this process.
- Start the engine: Start the vehicle and let it run for a few minutes, shifting through all the gears (Park, Reverse, Neutral, Drive) while holding the brake. This circulates the new fluid.
- Check the level: Turn the engine off and check the fluid level with the dipstick. Add more fluid in small increments if the level is low, or drain a small amount if it's too high.
- Re-check: Repeat the process of running the engine and checking the dipstick until the fluid level is correct according to the dipstick's hash marks for a "hot" reading.
Important considerations
- A drain and fill is different from a full transmission flush, which requires significantly more fluid (10-12 quarts or more) because it aims to replace all the fluid, including what's in the torque converter.
- You should always use the specific type of transmission fluid recommended by your vehicle's manufacturer to avoid damage.
- Some vehicles, like certain Land Rovers, do not have a dipstick and require a fluid extractor to add new fluid. Consult your owner's manual to be certain.
