How much transmission fluid does a 2019 f250 6.7 take?
For a complete transmission service on a 2019 Ford F-250 with the 6.7-liter Power Stroke and 6R140 automatic transmission, plan on about 18 quarts of automatic transmission fluid (ATF), roughly 17 liters. The exact amount depends on whether you’re draining only the pan or performing a full system flush, and whether you replace the transmission filter.
Understanding the question in more detail helps owners avoid under-filling or over-filling, which can affect shifting, cooling, and long-term reliability. Below are the typical capacities you’ll encounter in common service scenarios for this model.
Transmission fluid capacity for the 6R140 in the 2019 F-250
The figures below reflect common service methods. Actual amounts can vary by vehicle and service procedure, so consult the owner’s manual or a Ford service bulletin for the exact specification on your truck.
- Pan drain and fill (no torque converter drain or cooler-line flush): about 9–11 quarts (≈8.5–10.4 L).
- Full transmission service with filter replacement and pan drain: around 12–14 quarts (≈11–13.5 L).
- Complete system flush including cooler lines and torque converter refill: about 18 quarts (≈17 L).
These ranges cover the most common service scenarios. The actual amount you need may be slightly more or less depending on how much fluid remains in the torque converter and cooler circuits after servicing.
Practical tips for servicing the 6R140 transmission
To ensure accurate fill levels and proper operation, keep these guidelines in mind before and during service:
- Use the correct fluid specification for your vehicle year and model (Ford Mercon LV is commonly recommended for the 6R140). Some late-model service sheets reference Mercon SP depending on production date; verify with your manual or a service bulletin.
- Warm up the transmission before draining so the fluid runs evenly and readings are accurate.
- After filling, check the level with the dipstick while the engine is running and the transmission is at proper operating temperature; adjust as needed to the correct level.
- Replace the transmission filter during a full service to maintain proper flow and cooling.
If you’re not comfortable performing a full service yourself, this work is best handled by a qualified technician or Ford service center, as the 6R140 can be sensitive to precise fill levels and requires proper equipment for a flush if chosen.
Summary: For a 2019 F-250 with the 6R140, plan on roughly 18 quarts for a full service and around 9–11 quarts for a pan drain and refill. Always verify with the owner’s manual and service bulletins, and ensure correct fluid type and temperature when checking the level.
How many quarts of transmission fluid does a 6R140 take?
The Ford 6R140 transmission has a total capacity of about 16.2 to 17.4 quarts for a full rebuild, but an initial fill after a filter change is typically around 8 to 10 quarts. When changing the fluid, you will need to add a specific amount based on whether you are just changing the filter or doing a complete fluid flush.
This video demonstrates how to change the transmission fluid in a Ford 6R140: 42sFordTechMakulocoYouTube · Apr 17, 2017
Fluid capacity breakdown
- Initial fill (with filter change): Approximately 8.28.28.2 quarts. Some sources say up to 101010 quarts.
- Total fill (full rebuild): Approximately 16.216.216.2 to 17.417.417.4 quarts.
- Service kit (filter, pan gasket, and fluid): Kits often come with 101010 quarts of fluid, which is usually the amount needed for a standard service.
Important considerations
- Fluid type: The 6R140 transmission requires MERCON LV Automatic Transmission Fluid (ATF).
- Service vs. rebuild: The difference in capacity is because a simple service only replaces the fluid in the pan, while a complete rebuild also includes the fluid in the torque converter and cooler lines.
- Deep transmission pans: Aftermarket deep pans can significantly increase fluid capacity, with some adding as much as 777 quarts to the stock pan.
- Transfer case: The transfer case on many vehicles with the 6R140 transmission holds approximately 222 quarts of the same fluid.
You can watch this video to see what a Ford 6.7L Powerstroke 6R140 transmission looks like: 40sMed Tec67YouTube · Jan 31, 2021
How much transmission fluid does a 2019 6.7 Powerstroke hold?
The 2019 6.7L Powerstroke has a total automatic transmission fluid capacity of 17.4 quarts (16.5 L). For a drain and refill with a filter change, you will need approximately 8.2 to 8.75 quarts of fluid, as this accounts for the fluid remaining in the torque converter and other components. The recommended fluid type is Motorcraft Mercon LV.
You can watch this video for a step-by-step guide on how to service the transmission fluid: 57sBlue Collar GarageYouTube · Sep 19, 2022
2019 6.7 Powerstroke transmission fluid capacity
- Total fill: 17.4 quarts (16.5 L)
- Initial fill (drain and refill): Approximately 8.2 quarts, though it is recommended to add around 8.75 quarts for a drain and filter service.
- Recommended fluid: Motorcraft Mercon LV
- Transfer case fluid: 1.9 quarts (1.8 L)
Important considerations
- Fluid type: Always use the recommended Mercon LV fluid for your 2019 6.7L Powerstroke.
- Checking the level: The fluid level should be checked when the transmission is at normal operating temperature. A proper check involves running the engine and shifting through all gears before verifying the final fluid level.
- Aftermarket pans: If you have an aftermarket pan, the capacity may differ. It's important to follow the manufacturer's instructions for that specific pan.
How many quarts does a 2019 F250 6.7 take?
A 2019 Ford F-250 with the 6.7L Powerstroke engine takes 13 quarts of engine oil when including the filter change. It is important to verify the exact capacity for your specific vehicle, as some sources may suggest slightly different amounts or the capacity could be different on certain models.
- Engine oil capacity: 13 quarts (12.3 L) with filter change
- Recommended oil: A synthetic blend is recommended, such as Motorcraft SAE 10W-30 or 15W-40 for hotter climates, though other high-quality oils are also suitable.
- Important note: Always check the dipstick after refilling to ensure the correct level is reached. You may want to start by adding around 13 quarts and then check the level to top off as needed.
How much transmission fluid does a F250 diesel hold?
16.3 qt
Capacities and Specifications - 6.7L Diesel
| Item | Capacity |
|---|---|
| Automatic Transmission Fluid | 16.3 qt (15.4 L)4 |
| Front axle wheel bearing oil (8500 lb axle) | 6–7 fl oz (177–207 ml) |
| Front axle wheel bearing oil (all except 8500 lb axle) | 12–13 fl oz (355–385 ml) |
| Rear axle (S-140)(13.5k, 17.5k, 19k single speed) | 19 pt (9.0 L)4 |
