How much transmission fluid does a 2500HD Allison hold?
In most Chevrolet Silverado 2500HD trucks equipped with an Allison automatic transmission, the total transmission fluid capacity is in the mid-teens of quarts. The exact amount depends on the model year, the specific Allison variant, and whether you’re counting the torque converter in the total. For precise specifications, consult the owner's manual or GM service documentation for your exact vehicle.
Understanding the capacity ranges
Transmission fluid capacity can be broken down into a few practical figures that help when planning a service or a full drain-and-fill. The following ranges reflect typical values found on common 2500HD configurations that use the Allison 1000/2000 family.
- Total system capacity (including torque converter): about 14–16 quarts
- Pan capacity (drained, excluding the torque converter): about 10–12 quarts
- Torque converter fill (rough estimate, if you replace or drain the converter): about 3–4 quarts
- Filter change and full-fill adjustments: plan for roughly 1 quart extra to achieve the proper final level
These figures can vary by year and transmission variant, so exact specs should come from the vehicle’s manual or a GM service bulletin for your specific 2500HD model.
Practical implications for maintenance
When performing a drain-and-fill on a 2500HD with an Allison, technicians typically drain the pan, replace the filter, and refill to the manufacturer’s recommended level. Expect to use roughly 14–16 quarts of ATF to complete the service and reach the correct operating level, depending on whether the torque converter is included in the calculation.
If you’re doing a more comprehensive service that involves removing more components or servicing the converter itself, the total fluid needed may approach the upper end of the typical range. Always verify the precise capacity for your exact vehicle configuration before purchasing fluid.
Summary
For a Chevrolet Silverado 2500HD with an Allison automatic, plan on a total transmission fluid capacity in the mid-teens of quarts (roughly 14–16 quarts as a common benchmark). Use about 10–12 quarts for the pan alone, with an additional 3–4 quarts for the torque converter if you’re counting it in total fill, plus a small extra allowance for a new filter and accurate final level. Always confirm with the owner’s manual or GM technical resources for your specific year and transmission variant.
How much transmission fluid does a 2016 Chevy 2500 HD hold?
Automatic Transmission Fluid
Capacity: 7.4 quarts Initial Fill.
How many quarts of transmission fluid does an Allison 3000 take?
And um yeah I can't do math apparently because this holds according to the book here let's get you a number on what this what this thing's going to hold the the capacity initial fill is 26 quarts.
What kind of transmission fluid does a 2018 Chevy Silverado 2500hd Duramax take?
DEXRON-VI Automatic Transmission Fluid (ATF).
How much fluid does a 6.6 Duramax Allison transmission hold?
What is the Oil Capacity of a Duramax? The 6.6 liter Duramax oil capacity is 10 quarts — a massive amount of oil.
