Loading

How much transmission fluid does a 4L60E take?


The 4L60E transmission is a popular automatic transmission used in a variety of General Motors vehicles. Knowing how much transmission fluid it requires is essential for proper maintenance and optimal performance. In this article, we will explore the fluid capacity of the 4L60E and provide tips for checking and maintaining your transmission fluid levels.


Transmission Fluid Capacity


The 4L60E transmission typically requires approximately 11 to 12 quarts of transmission fluid when performing a complete fluid change. This includes draining the fluid from the transmission pan and replacing the filter. However, if you are only doing a fluid top-off or a partial fluid change, the amount needed may be significantly less.


Steps to Check and Change Transmission Fluid


Maintaining the correct transmission fluid level is crucial for the longevity and performance of your vehicle. Here are the steps to check and change the transmission fluid in a 4L60E:



  • Gather Necessary Tools: You will need a socket set, a transmission fluid pump, a new filter, and the appropriate transmission fluid.

  • Warm Up the Vehicle: Start the engine and let it run for a few minutes to warm up the transmission fluid.

  • Check Fluid Level: With the engine running, shift through all the gears and then back to park. Check the fluid level using the dipstick; it should be within the marked range.

  • Drain Old Fluid: Place a drain pan under the transmission pan and remove the pan bolts to drain the old fluid.

  • Replace Filter: Remove the old filter and install the new one, ensuring a proper seal.

  • Reinstall the Pan: Reattach the transmission pan and tighten the bolts to the manufacturer's specifications.

  • Add New Fluid: Using a fluid pump, add the new transmission fluid through the dipstick tube until it reaches the proper level.

  • Check for Leaks: Start the engine and check for any leaks around the transmission pan.


Conclusion


Regular maintenance of your 4L60E transmission, including checking and changing the transmission fluid, is vital for ensuring its performance and longevity. By following the steps outlined above, you can help keep your vehicle running smoothly and avoid costly repairs down the line.


Frequently Asked Questions

How much transmission fluid does a 2006 Chevy Silverado hold?


Automatic Transmission Fluid
Capacity: 4 speed 4L60-E Total Fill 11.2 quarts. Capacity: 5 quarts Initial Fill.



Is ATF the same as DEXRON?


DEXRON is the trade name for a group of technical specifications for automatic transmission fluid (ATF) created by General Motors (GM). The name was first registered as a trademark and later evolved into a brand of GM.



What brand of transmission fluid does GM use?


ACDELCO OFFERINGS COVER SEVERAL APPLICATIONS
With that in mind, ACDelco offers a range of high-quality fluids for a variety of transmissions — from automatic to manual to dual clutch — that are designed to keep the gearboxes running smoothly.



What transmission fluid to use in a 4L60E?


Transmission Fluid

ManufacturerTransmission TypeTransmission Fluid
CADILLAC4L60EDEXRON III
CHEVROLET4L60EDEXRON III
ISUZU4L60EDEXRON III
OLDSMOBILE4L60EDEXRON III



How much transmission fluid does a 97 Chevy 1500 4L60E hold?


11.2 quarts



How much transmission fluid do I need?


How much transmission fluid your vehicle needs ranges from as few as 8-9 quarts for small passenger vehicles to more than 20 quarts for heavy-duty trucks. As you do when determining how often to change transmission fluid, check your owner's manual for the transmission fluid capacity.



How often does GM recommend changing transmission fluid?


For an automatic it could be anywhere from 30,000 to 100,000 miles. Be aware that these intervals fluctuate based on many factors. It's best that you both check your owner's manual and speak with a certified GM service advisor to come up with the best intervals for your vehicle.



Can you mix DEXRON VI with ATF 4?


Can MaxLife ATF be mixed with Dexron VI or does the fluid need to be purged prior to installing MaxLIfe ATF? Valvoline MaxLife ATF transmission fluid is 100 percent compatible with the DEXRON VI for mixing or flushing a system.



How many quarts does a 5.3 Chevy transmission take?


For Automatic Transmission: 6L80....AF6

Capacity:6 speed With O Cooling 6L80 Total Fill 12.2 quarts.
Capacity:6 speed With Cooling 6L80 Total Fill 12.4 quarts.
Capacity:6 quarts Initial Fill.



How much transmission fluid do I need for a 4L60E?


Automatic transmissions: 4L60-E: 11.2 quarts.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.