How to change dashboard display Honda HR-V?
The display in your Honda HR-V can be adjusted by cycling through gauge layouts with the DISP/VIEW control on the steering wheel and by selecting different information items from the instrument cluster menu. You can also tweak brightness using a dimmer control near the dash. These steps apply to most model years, but exact button labels may vary by trim.
The following guide explains how to switch between dashboard layouts, customize which data appears, and fine‑tune visibility so you can read critical information at a glance while driving. While the core controls are similar across generations, some details can differ by year and trim, so consult your owner's manual for year-specific instructions.
Cycle through gauge layouts and information (the basics)
Use the steering-wheel controls to rotate through the available instrument cluster views and data fields. This sequence covers the typical options you’ll encounter.
- Locate the DISP or VIEW button on the left side of the steering wheel. Press it repeatedly to cycle through the main gauge layouts (such as standard, larger speedometer, and extended driving information).
- Observe the instrument cluster as the display updates with each press. The options typically include trip information, fuel economy, range, and a simplified gauge view.
- If your HR-V has a MENU or Info button on the cluster, press it to enter additional display options and data fields you can toggle on or off.
By rotating through these options, you’ll quickly find a display that shows the data you rely on most during daily driving and longer trips.
Customize what information appears on the dash
Beyond the basic cycle, you can tailor which data blocks appear on the instrument cluster for quick reference. The exact path can vary by year and trim, but the typical flow is the same.
- Press the MENU/Info button on the cluster or use the up/down arrows with the OK/ENTER button to access the instrument‑cluster menu.
- Navigate to the section labeled Display, Meter, or Vehicle Information, then select the data items you want shown (for example: Trip A, Trip B, Fuel Economy, Range, Compass).
- Confirm your selections and exit the menu; the chosen data blocks should now be visible in the gauge cluster or HUD region if equipped.
Using this method, you can focus on the metrics that matter most to your driving style, whether you’re monitoring fuel efficiency on a highway trip or tracking a long-range itinerary.
Adjust brightness and overall visibility
Clear visibility of the dashboard is essential, especially at night or on bright days. The HR-V provides a dedicated brightness control and, in some years, a separate dimmer for the instrument cluster.
- Find the small dimmer wheel or dial on the lower left portion of the instrument cluster or near the headlight switch. Rotate it to increase or decrease the brightness of the gauges and display.
- If your model uses the multifunction switch, you may also access brightness settings through the main infotainment display by going to Settings > Display; however, this does not apply to every generation.
Set the brightness to a comfortable level so that numbers and indicators are legible without being distracting.
Model-year and trim variations
Button labels and exact menu paths can differ. For example, newer HR-Vs (the KF generation, around 2022–2024) tend to use the DISP/VIEW control more consistently, with an on-screen Menu that includes Trip, Fuel Economy, and Vehicle Information. Older models may rely more on the instrument cluster buttons and basic trip readouts. If in doubt, consult your owner’s manual or check Honda’s official support resources for your VIN and trim.
Troubleshooting display issues
If the dashboard display doesn’t respond or the data shown seems incorrect, you should first confirm you’re using the correct controls for your specific year and trim. A software update or dealer diagnostic can fix issues related to the instrument cluster firmware. If the vehicle is under warranty, seek service to ensure accurate data display.
Summary
To tailor the Honda HR-V dashboard display, start by cycling through gauge layouts with the DISP/VIEW control and using the instrument cluster menu to choose which data blocks appear. Adjust brightness with the cluster dimmer, and remember that exact steps can vary by year and trim. When in doubt, refer to the owner’s manual or contact a Honda dealer for model-specific guidance for your HR-V.
How to change Honda HR-V speedometer color?
The HR-V driver can select a different color to represent inefficient driving: While the vehicle is stopped with the ignition off and the ambient meter on, push the SELECT/RESET knob on the instrument panel repeatedly to cycle from white to blue, purple, pink, red, amber or yellow.
How to change dashboard display Honda?
Design you just saw the bar. Design. But if you want the minimal. Look here is round minimal. And then last but not least going to push that scroll wheel one more time.
How to change dashboard display Honda HR-V?
To switch the display press the information button. Press the SEL/RESET button or select/reset knob to change the display.
PDF
How to change Honda HR-V wallpaper?
But I want to add my own add new there it is my own wallpaper starting to import. There we go come down preview i can see what it looks. Like. Then set so now Now I'm all set for the wallpaper.
