How to change door code on 2000 Ford Excursion?
If you own a 2000 Ford Excursion, you may need to change the door code from time to time, whether it's for security reasons or because you've forgotten the existing code. Fortunately, the process is relatively straightforward and can be completed in just a few steps.
Steps to Change the Door Code
- Locate the keypad on the driver's side door. This is where you'll enter the new code.
- Press the "1/2" button on the keypad and hold it down for about 5 seconds until the lights on the keypad start flashing.
- Enter the current door code, then press the "3/4" button.
- Enter the new 5-digit code you want to use, then press the "5/6" button to save the new code.
- Test the new code by entering it and pressing the "7/8" button to ensure it works.
That's it! You've successfully changed the door code on your 2000 Ford Excursion. Remember to keep the new code in a safe place, as you'll need it to access your vehicle in the future.
Troubleshooting Tips
- If the keypad doesn't respond: Check the battery in the keypad and replace it if necessary.
- If you forget the current code: You may need to consult your owner's manual or contact a Ford dealership for assistance in resetting the code.
- If the new code doesn't work: Double-check that you entered the code correctly and try the process again.
By following these steps, you can easily change the door code on your 2000 Ford Excursion and ensure the security of your vehicle. If you encounter any issues or have additional questions, don't hesitate to seek further assistance from a qualified automotive technician.
Where is my Ford keyless entry code?
You can operate the keypad with the factory-set five-digit entry code. The code is on the owner's wallet card in the glove box and is available from an authorized dealer. You can also program up to five of your own five-digit personal entry codes.
How do I change the code on my Ford Excursion door?
Programming a Personal Keyless Entry Code With the Keypad
- Enter the five-digit factory-set code.
- Press 1•2 on the keypad within five seconds.
- Enter your personal five-digit code. You must enter each number within five seconds of each other.
- Press 1•2 on the keypad to save personal code 1.
Where is the key code on a 2000 Ford Excursion?
Look on the supporting module for the label with the 5 numeric charcters whcih is the door code. On this vehicle the GEM module controls the key pad. This module is mounted to the back side of the interior fuse panel below and to the left of the steering column behind the removeable trim panel.
How do I reset my Ford key code?
How To Reset Your Ford Keyless Entry
- Enter the factory-set five-digit code.
- Press and release 1•2 on the keypad within five seconds.
- Press and hold 1•2 for two seconds. You must do this within five seconds of completing step 2.
- All personal codes should now be erased; only the factory-set five-digit code will work.
How do I change my Ford door code without factory code?
To reset your Ford F150 door code without factory codes, you'll either need to find an online generator to obtain a factory code or reach out to your Ford dealership to obtain a new one. Once you've gotten a new code, press the button numbers one and two, then enter your new personal code on the keypad.
How do I get a 5 digit factory code for my Ford?
Look for the factory code.
The 5 digit security code is usually in the glove department if you have not moved the owner's wallet card. The 5 digit code can also be found on years 2011- 2018 on a white label inside passenger side fuse box, it will be the 5 numbers you need, followed by a letter.
