How to enable remote start on Dodge Journey 2015?

The Dodge Journey 2015 offers a convenient remote start feature that allows you to start your vehicle from a distance. This can be particularly useful on cold or hot days, as it lets you warm up or cool down the cabin before you get in. Here's a step-by-step guide on how to enable remote start on your Dodge Journey 2015.

Steps to Enable Remote Start

• Make sure your Dodge Journey is equipped with the remote start feature. This is typically an optional add-on that can be purchased with the vehicle.


• Locate the remote start button on your key fob. It is usually a separate button, often labeled with a circular arrow symbol.


• Press and hold the remote start button for a few seconds until the vehicle's lights flash, indicating that the remote start has been activated.


• The vehicle will now start and run for a pre-set duration, typically 5-15 minutes, to allow the cabin to reach the desired temperature before you get in.


• To turn off the remote start, simply press the remote start button again or start the vehicle using the key in the ignition.

It's important to note that the remote start feature may have certain limitations, such as only working within a specific range or requiring the vehicle to be in park with the parking brake engaged. Additionally, some states or local regulations may have restrictions on the use of remote start systems. Always check your local laws and the vehicle's owner's manual for any specific requirements or limitations.

Benefits of Remote Start

Enabling the remote start feature on your Dodge Journey 2015 can provide several benefits, including:

• Improved Comfort: You can start your vehicle and let it warm up or cool down before you get in, making your commute more comfortable.


• Increased Convenience: Remote start allows you to start your vehicle without having to physically go outside, which can be especially useful in inclement weather or when you're in a hurry.


• Enhanced Security: With the vehicle running, you can keep the doors locked, deterring potential thieves.


• Reduced Idling Time: By starting the vehicle remotely, you can minimize the time the engine idles, which can help improve fuel efficiency and reduce emissions.

Overall, the remote start feature on the Dodge Journey 2015 is a valuable addition that can make your driving experience more comfortable, convenient, and efficient.

How do I activate my remote start?

Button then hold the start button for about 4 seconds. The engine will start and the preset temperature.

Does a 2015 Dodge Journey have remote start?

And then the Dodge Journey will start right up for you push button start -.

Why is my remote start disabled?

Your remote start is likely disabled due to safety features preventing it from starting, such as an open door/hood, a low vehicle battery, or a check engine light. Other common reasons include having too many failed start attempts, a dead key fob battery, or needing to perform the correct starting procedure, like ensuring the car is in park. 
Common reasons for remote start to be disabled 
This video explains some common reasons why a remote start might not work, including the hood switch, open doors, and check engine light: 57sMotorCarNutYouTube · Oct 26, 2024

• Safety interlocks: Your vehicle has safety features that prevent remote start if certain conditions aren't met. 
  • The hood or a door is not fully closed. 
  • The transmission is not in Park. 
  • A key is still in the ignition. 
• Vehicle status: The vehicle's condition can prevent it from starting remotely. 
  • A weak or dead car battery. 
  • Low engine coolant or low oil pressure. 
  • The check engine light is on. 
  • The gas tank is low. 
• Key fob or system issues: Problems can originate with the remote itself or the system. 
  • A dead or weak key fob battery. 
  • Too many consecutive failed start attempts. 
  • The system may have been accidentally put into "valet" or "service" mode. 
• Incorrect procedure: You may not be following the correct steps to start the vehicle remotely. 
  • Not pressing the lock button before the remote start button. 
  • Holding the remote start button for the incorrect amount of time. 

This video demonstrates the correct procedure to start a Jeep with remote start, including pressing the lock button first: 22sWalser Chrysler Jeep Dodge RamYouTube · Dec 5, 2024
How to troubleshoot and fix

1. Check the basics: Make sure the car is in Park, the hood is closed, and all doors are shut. 
2. Press the buttons correctly: Follow the specific procedure for your vehicle. Usually, you need to press the "lock" button first, then press and hold the "remote start" button. 
3. Replace the fob battery: If your key fob's light is dim or doesn't come on, replace the battery. 
4. Address vehicle alerts: Look for any warnings on the dashboard, such as a check engine light or low fuel light, and address them. 
5. Cycle the power: If you've had several failed attempts, try inserting the key, turning the ignition on and then off, and then attempting the remote start again. 
6. Consult your manual: Your owner's manual has specific instructions for your vehicle's remote start system and may have other troubleshooting steps. 
7. Check physical components: Inspect the hood pin switch and any other safety sensors for damage or misplacement. 
8. Reset the system: Refer to your manual for how to reset the system, which may involve a specific sequence of button presses or turning the key on and off multiple times while holding the brake. 

How to enable remote start in Dodge Journey?

And the most important part in my opinion. Auto on driver heated seat and steering wheel with vehicle start now this is something I always like to use because uh if you come to a cold vehicle.