Loading

How to reprogram TPMS sensors on Toyota?


Reprogramming the Tire Pressure Monitoring System (TPMS) sensors on your Toyota is an essential maintenance task that ensures your vehicle accurately monitors tire pressure. Properly functioning TPMS sensors help maintain safety, improve fuel efficiency, and extend tire life. In this guide, we’ll walk you through the steps to reprogram TPMS sensors on a Toyota vehicle.


What Are TPMS Sensors and Why Are They Important?


TPMS sensors are small devices installed in your vehicle's tires that monitor air pressure and send real-time data to

As the owner of Kevin's Autos, a trusted auto service provider in the Mountain View, CA area, I've had years of experience helping Toyota owners maintain and repair their vehicles. One common issue that often arises is the need to reprogram the Tire Pressure Monitoring System (TPMS) sensors on Toyota models. In this article, I'll guide you through the step-by-step process to get your TPMS sensors back up and running.


What is TPMS and Why Does it Need Reprogramming?


The Tire Pressure Monitoring System (TPMS) is a safety feature found in most modern vehicles, including Toyota models. TPMS sensors are installed in each wheel and monitor the air pressure in your tires. When the pressure drops below a certain threshold, the TPMS warning light on your dashboard illuminates, alerting you to the issue.


Reprogramming the TPMS sensors is often necessary when you replace your tires, rotate them, or have a sensor replaced. This process tells the vehicle's computer system to recognize the new sensor IDs and monitor the correct tires. Without reprogramming, the TPMS warning light will remain on, even if the tire pressure is correct.


Steps to Reprogram TPMS Sensors on Toyota


Reprogramming the TPMS sensors on your Toyota is a straightforward process that can be completed in a few simple steps. Here's what you need to do:



  1. Ensure the tires are properly inflated. Check the recommended tire pressure for your Toyota model and inflate the tires accordingly.

  2. Locate the TPMS reset button. This is usually found under the dashboard or in the glove compartment. Consult your owner's manual if you're unsure of the location.

  3. Press and hold the TPMS reset button. The dashboard TPMS warning light should begin to flash, indicating the system is in learning mode.

  4. Drive the vehicle for 10-20 minutes. This allows the system to learn the new sensor IDs and associate them with the correct tire positions.

  5. Verify the TPMS warning light is off. If the light remains on, repeat the process or consult a professional technician for further assistance.


Tips for Maintaining TPMS on Your Toyota


To keep your Toyota's TPMS system functioning properly, consider the following tips:



  • Check tire pressure regularly. Maintain the recommended tire pressure to prevent the TPMS warning light from illuminating unnecessarily.

  • Replace TPMS sensors when needed. If a sensor is damaged or malfunctioning, have it replaced by a qualified technician to ensure accurate tire pressure monitoring.

  • Reprogram sensors after any tire service. Anytime you replace, rotate, or have your tires serviced, be sure to reprogram the TPMS sensors to avoid issues.


By following these steps and maintaining your Toyota's TPMS system, you can keep your vehicle safe and ensure your tires are properly inflated for optimal performance and fuel efficiency. If you have any further questions or need assistance with your Toyota's TPMS, don't hesitate to contact the experts at Kevin's Autos.

Frequently Asked Questions

How to reset Toyota sensors?


Drive at 50 mph or higher for 10 minutes: This can trigger a sensor reset when you turn off and restart the car.



How do I reset my Toyota TPMS sensor?


With the vehicle off, turn the key to the “ON” position, but do not start it. Hold the TPMS reset button until you see the flashing tire pressure light blink three times. Then release the reset button. Start the car and give it about 20 minutes for the sensor to refresh.



Do Toyota tire pressure sensors need to be programmed?


Each sensor transmits a unique ID number to the computer on the car. So yes, the TPMS computer on the car needs to be programmed with the ID numbers of the sensors that are installed.



How to reprogram Toyota TPMS sensors?


Hold the TPMS reset button until you see the flashing tire pressure light blink three times. Then release the reset button. Start the car and give it about 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically found under the steering wheel.



How much to reprogram TPMS Toyota?


The average cost for a Toyota Corolla Tire Pressure Monitoring System Relearn is between $35 and $44 but can vary from car to car.



How long does it take for sensors to reset?


The car's internal computer only resets after a set period where it checks all of its sensors once more. The reset can happen automatically after around 10 to 20 cycles. A cycle is a phase where you turn on the car and turn it off again. For other vehicles, you'll have to drive around 50 to 100 miles before it resets.



Can you program TPMS sensors yourself?


Follow the on-screen instructions on the TPMS tool to program each sensor to the vehicle's TPMS system. This process may involve inputting new sensor IDs or copying the old sensor's ID to the new sensor. Top of the line scan tools like Autel allow for "auto creation" where it takes care of all this automatically.



Are Toyota TPMS sensors programmable?


Because they are programmable, they tend to offer latest coverage without part number supersession.



How do you reprogram the TPMS sensor on a Toyota?


Hold the TPMS reset button until you see the flashing tire pressure light blink three times. Then release the reset button. Start the car and give it about 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically found under the steering wheel.



Can you relearn TPMS sensors without a scan tool?


With the exception of some models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.