What size socket is the axle nut on a 2009 Toyota Camry?
The axle nut size on a 2009 Toyota Camry is typically 30mm. This is the standard size used for the rear axle nuts on this model year of the popular midsize sedan.
Detailed Explanation
The 2009 Toyota Camry is equipped with a rear independent suspension system, which means each rear wheel is connected to the vehicle's frame via a separate axle. These axles need to be secured in place using large nuts, commonly referred to as "axle nuts" or "spindle nuts".
According to the information gathered from various automotive repair resources, the factory-specified size for the rear axle nuts on a 2009 Toyota Camry is 30mm. This size is consistent across the Camry model line for that year, as Toyota typically standardizes hardware components like this across a particular vehicle generation.
Importance of Proper Axle Nut Size
Using the correct axle nut size is crucial for the safe operation of a vehicle. If the nuts are too small, they may not provide enough clamping force to keep the axle securely in place, potentially leading to wheel separation and a dangerous loss of control. Conversely, if the nuts are too large, they may not thread properly onto the axle, again compromising the wheel's attachment.
It's important for DIY mechanics or those having their Camry serviced to ensure the rear axle nuts are the proper 30mm size. Failure to use the right hardware can result in expensive repairs and serious safety issues.
What size are the wheel nuts on a 2009 Corolla?
Wheel Nut M12-1.50 Mag – 21mm Hex, 46.5mm Length. Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dometop, 1.831″ Length, Natural (Sold by each)
What size is the axle nut bolt?
36mm Axle Nut Socket - services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket - services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket - services many GM mid-size vehicles. 29mm Axle Nut Socket - services late model GM, Ford and Asian imports.
What size socket is a Toyota wheel nut?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
What size socket do I need for wheel nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket is a Toyota axle nut?
39650 39mm 12 pt Axle Nut Socket for Toyota.
What size socket for 2009 Toyota Camry lug nuts?
21mm Hex
Dorman – Wheel Nut M12-1.50 Standard – 21mm Hex, 16mm Length (Part No. 611-066)
What size socket do I need to remove wheel nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size is the axle nut on a 2009 Camry?
The axle nut is 30mm 12 point. You will need a Deep 30mm 12 point socket. Alternative deep sockets that will work are a deep 33mm 6 point and a deep 1 3/16" 12 point.
What size socket is needed to remove a CV axle?
36mm is correct. Make sure it's attached to a decent breaker bar; those things are on there pretty tight.
Is 13 16 the same as 21mm?
You can use a 21mm socket on a 13/16 nut. But not vice versa. And the fitment might not be great (Depends on manufacturing tolerances). 13/16 of an inch is 20.65mm.
