Loading

How to reset 2008 Toyota Yaris tire pressure light?

If the tire pressure warning light on your 2008 Toyota Yaris is illuminated, it's an indication that one or more of your tires has low air pressure. Resetting the tire pressure light is a simple process that can be done in just a few steps. In this article, we'll guide you through the steps to reset the tire pressure light on your 2008 Toyota Yaris.


Steps to Reset the Tire Pressure Light



  1. Check the tire pressure in all four tires, including the spare, and inflate them to the recommended pressure level. You can find the recommended tire pressure in your owner's manual or on the driver's side door jamb sticker.

  2. Turn the ignition to the "On" position without starting the engine.

  3. Press and hold the tire pressure reset button, which is usually located on the dashboard or near the steering wheel. Hold the button for about 3-5 seconds until the tire pressure warning light blinks or turns off.

  4. Start the engine and verify that the tire pressure warning light is no longer illuminated.


If the tire pressure warning light remains on after following these steps, there may be an issue with the tire pressure monitoring system (TPMS) that requires further diagnosis and repair by a qualified mechanic.


Importance of Maintaining Proper Tire Pressure


Maintaining the correct tire pressure is essential for the safety and performance of your 2008 Toyota Yaris. Underinflated tires can lead to decreased fuel efficiency, uneven tire wear, and increased risk of a blowout. Overinflated tires, on the other hand, can result in a harsher ride and reduced traction. By regularly checking and adjusting your tire pressure, you can help ensure your vehicle's handling, braking, and overall safety.


Conclusion


Resetting the tire pressure light on your 2008 Toyota Yaris is a straightforward process that can be done in just a few minutes. By following the steps outlined in this article, you can quickly address the issue and ensure your vehicle is operating safely and efficiently. Remember to regularly check and maintain the proper tire pressure to keep your Yaris running at its best.

Where is the TPMS reset button on a 2008 Toyota Yaris?


The 2008 Toyota Yaris does not have a dedicated TPMS reset button. To reset the system, ensure all tires are inflated to the correct pressure, then drive the vehicle for about 10-15 minutes at a speed above 252525 mph for the sensors to recalibrate. If the light does not reset, there may be a sensor or battery issue, which could require a visit to the dealer for a scan tool to reprogram new sensors. 
This video shows the location of the TPMS reset button in a Toyota Yaris: 53saaanton11YouTube · Aug 26, 2018
Troubleshooting steps for your 2008 Yaris

  1. Check tire pressure: Before anything else, make sure all four tires are inflated to the manufacturer's recommended pressure, which can be found on the sticker in the driver's side door jamb. 
  2. Drive the vehicle: Turn the ignition on, but do not start the engine. Drive the car for approximately 10-15 minutes at a speed above 252525 mph. The system should automatically reset after this period. 
  3. Consult the manual: If the light remains on, check your owner's manual for model-specific instructions or troubleshooting tips. 
  4. Seek professional help: If the light still won't go off, it's possible there is a problem with a TPMS sensor or its battery. In this case, a trip to the dealer may be necessary, as they have the tools to diagnose the issue and reprogram new sensors if needed. 

You can watch this video for a step-by-step guide on how to reset the TPMS light on a 2008 Toyota Yaris: 37sBackyard ChevyYouTube · Jun 12, 2020



How do you reset the low tire pressure light on a Toyota Yaris?


Get your tire pressures all perfect to start with. And then put the ignition. On put your hand down by your feet driver's side just above the accelerator pedal on a really flimsy plastic kick panel.



How to reset Toyota Yaris 2008?


Here. Once you got the trip a displayed you'll want to turn the key back to the off. Position you'll want to press and hold the odometer trip button as you turn the key to the on position.



Where is the TPMS reset button on a Toyota?


The location of the TPMS reset button on a Toyota varies by model year and can be found low on the dashboard to the left of the steering wheel, inside the glove compartment, or on the lower right of the instrument panel. For newer models, the reset is often performed through the vehicle's multi-information display on the dashboard, not a physical button. 
This video shows how to locate and use the TPMS reset button on a Toyota Highlander: 58sSmart Easy DIYYouTube · Dec 23, 2015
Common locations for a physical button

  • Under the steering wheel: This is a very common location, often low and to the left or right of the steering column. 
  • Glove compartment: On some models, you need to open the glove box to find the button. 
  • Near the parking brake: On some models, you might find it tucked near the pedal area close to the parking brake pedal. 

How to reset using a physical button
  1. Ensure all tires are inflated to the correct pressure. 
  2. Turn the ignition to the "ON" position (do not start the engine). 
  3. Press and hold the TPMS reset button until the TPMS indicator light on the dashboard blinks slowly three times. 
  4. Release the button. 
  5. Turn off the engine and wait for several minutes for the system to update. 

How to reset in newer models with a multi-information display
  1. Turn the ignition to the "ON" position.
  2. Use the arrow or "OK" buttons on your steering wheel to navigate the multi-information display.
  3. Find and select "Vehicle Settings" or "TPMS".
  4. Follow the on-screen prompts to set the pressure. 

This video demonstrates how to reset the TPMS light using the multi-information display on a Toyota Rav4: 55sSCC ToyotaYouTube · Oct 17, 2023
Important notes
  • After a tire rotation or replacement, you will need to reset the system to ensure it is working correctly. 
  • If the light continues to flash after a successful reset, there may be an issue with a sensor, and you should have the vehicle inspected at a Toyota dealership. 


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.