What kind of oil does a Chevy Traverse use?
The Chevy Traverse, a popular midsize SUV, requires the use of a specific type of engine oil to ensure optimal performance and longevity. According to the manufacturer's recommendations, the Chevy Traverse should use 5W-30 synthetic motor oil.
Recommended Oil Type for Chevy Traverse
The Chevy Traverse is designed to use 5W-30 synthetic motor oil. This oil specification is recommended by Chevrolet for the Traverse's 3.6-liter V6 engine. The 5W-30 oil provides the necessary lubrication and protection for the engine, while also helping to improve fuel efficiency.
It's important to use the recommended oil type and viscosity to maintain the Traverse's warranty and ensure the engine operates as intended by the manufacturer. Using the wrong oil can lead to increased wear and tear on the engine components, reduced fuel economy, and potentially even engine damage over time.
Oil Change Intervals for Chevy Traverse
Chevrolet recommends changing the oil and filter in the Chevy Traverse every 7,500 miles or 12 months, whichever comes first. However, it's always a good idea to refer to the owner's manual for the most up-to-date maintenance schedule, as it may vary depending on driving conditions and usage.
Regular oil changes are essential for maintaining the Traverse's engine health and ensuring the vehicle runs smoothly for years to come. Neglecting oil changes can lead to increased wear and tear on the engine, reduced fuel efficiency, and potentially even engine failure.
Tips for Maintaining the Chevy Traverse's Engine Oil
- Use only the recommended 5W-30 synthetic motor oil
- Change the oil and filter at the recommended intervals
- Check the oil level regularly and top up as needed
- Avoid mixing different types of motor oil
- Consider using a high-quality oil additive to enhance performance and protection
By following the manufacturer's recommendations and maintaining the Chevy Traverse's engine oil, you can help ensure the vehicle's longevity and optimal performance on the road.
Does Chevy recommend synthetic oil?
We highly recommend fully synthetic oil because it better suits your Chevy engine.
Can you mix synthetic oil with regular oil?
Can You Mix Conventional Oil With Synthetic? The short answer is yes. There is no danger or risk of combustion, and mixing the two types of oil won't harm your engine. However, it's important to note that if you do mix the two, the conventional oil can keep the synthetic from performing to its fullest potential.
How long can a Chevy Traverse go without an oil change?
The broad guideline for Chevrolet vehicle oil changes is between 7,000-10,000 miles. That said, certain vehicles will need their oil changed sooner, and this is doubly true for vehicles being driven hard.
How much oil does a 3.5 traverse take?
Pour 6 quarts of new oil. Reset the oil change button in your Chevy Traverse.
What type of oil does my Chevy Traverse take?
AMSOIL OE 5W-30 100% Synthetic Motor Oil.
How many quarts of oil does a 2017 Chevy Traverse with a 3.6 L take?
6 quarts
Oil Grade: SEOC3
| Viscosity: | 0W-30 (Below -29°C) 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 6 quarts (with filter). After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
| Notes: | (1) This specification has been updated from Dexos 1 Gen 2 to GM Dexos 1 Gen 3. |
What oil does Chevy use from factory?
For example, one of the most common engine oils found in Chevrolet vehicles is called 5W-30. Other oil types like 10W-30 or 5W-20 are also used in some engines. You'll find the recommended rating for your car in the owner's manual.
What is the best oil for 2017 Traverse?
Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil: 5 Quart (Part No. 1598B1) Castrol EDGE with Fluid TITANIUM Technology is Castrol's strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance.
Is it better to use synthetic oil or regular oil?
Due to the additives and uniform molecular structure, synthetic oil lubricates better, flows better, is less prone to oxidation, and is more stable than conventional oil. 2. Engine Wear: Regular oil can have tiny unwanted bits that can accumulate over time and create deposits in the engine if you don't change it often.
What kind of oil does a 3.6 L V6 take?
The 3.6L Pentastar® V6 engine takes a synthetic blend oil. It's preferred that you use one with an oil weight of SAE 0W-20. If you've got the 5.7L HEMI® engine, however, you'll want to use synthetic oil that's got a weight of SAE 5W-20.
