How to set cruise control on Subaru Impreza?
To set cruise control on a Subaru Impreza, turn on the system with the steering-wheel controls, accelerate to your desired speed, and press the set button to lock it in. You can adjust speed with the +/- controls, cancel with the brake or a dedicated cancel, and if your model has EyeSight, you can also choose a following distance. This guide covers both standard and adaptive cruise control across common Impreza trims.
Non-adaptive cruise control: basic operation
This section covers the standard cruise control setup on Impreza models without EyeSight adaptive cruise control. The steps are designed for straightforward highway use where sensors are not actively monitoring traffic ahead.
- Start the engine and accelerate to the speed you want to maintain.
- Turn on cruise control by pressing the CRUISE ON/OFF button on the steering wheel until the cruise indicator lights up.
- Press SET/− to lock in your current speed.
- To adjust speed, press RES/+ to increase or SET/− to decrease; a single press changes speed in small increments, while holding changes more quickly.
- To cancel cruise control, press CANCEL or tap the brake pedal, or press the CRUISE OFF button.
- To resume to the previously set speed after cancellation, press RES/+.
In practice, drivers use this feature on long, straight stretches of highway to reduce fatigue and maintain a steady pace. Always stay attentive and ready to override with the brake or accelerator if conditions require it.
Adaptive cruise control with EyeSight
How EyeSight changes the way you cruise
EyeSight adds radar- and camera-based sensing that can adjust your speed to match traffic ahead and maintain a safe following distance. This section explains how to engage and manage cruise control with EyeSight equipped.
Use these steps to engage adaptive cruise control and set distance preferences on Impreza models with EyeSight.
- Accelerate to your desired speed on a clear road.
- Press the CRUISE ON/OFF or CRUISE button to enable Cruise with EyeSight; confirm that the cruise indicator is active.
- Press SET to lock in your current speed at the selected rate.
- Use RES/+/− to adjust the set speed as needed; use the Distance control to choose a following distance (usually shown as 1–4 bars, with more bars meaning greater distance).
- To cancel, press CANCEL, tap the brake, or turn off the Cruise feature with the CRUISE OFF button. The car will return to manual driving without maintained cruise.
- To resume, press RES/+ to return to the previously set speed after a cancellation or braking.
Note that EyeSight adaptive cruise control relies on sensors and can be affected by weather, road conditions, and sensor cleanliness. Always stay alert and be prepared to take over when driving in challenging conditions.
Safety considerations when using cruise control
Cruise control helps with steady speed but does not replace driver attention. Avoid using it in heavy traffic, on winding roads, in rain or snow, or where road conditions are unclear. Keep both hands on the wheel, maintain a safe following distance, and be ready to brake or disengage at any moment.
Summary
Setting cruise control on a Subaru Impreza involves turning the system on, accelerating to the desired speed, and pressing SET to lock it in. For EyeSight-equipped models, you can also select a following distance to adapt to traffic conditions. Always monitor the road and be prepared to override the system when necessary for safety.
How to use cruise control on a Subaru Impreza 2013?
Away. And then up here we can increase the number by pressing that. And you can see 1 2 two three four bam. Four car lengths. And then here we can set it to a specific speed let's say we're going 65.
How to set cruise control on a Subaru Impreza?
Control. Say you don't want your distance set from the car in front of you you can just hold this down. And now you're in regular cruise.
How do I activate my cruise control?
To turn on cruise control, first accelerate to your desired speed, then press the "On/Off" button to activate the system, and finally press "Set" to lock in the speed. You should see an indicator light on your dashboard confirming the system is active.
This video explains how to use cruise control in a car: 57sAdvance Driving SchoolYouTube · May 8, 2019
Step 1: Turn on the system
- Locate the "On/Off" button, which is usually on the steering wheel or a stalk behind it.
- Press the "On/Off" button to enable the system. A "Cruise Main" message or an indicator light will appear on the dashboard, but the system is not yet active at a specific speed.
Step 2: Set your speed
- Drive at the speed you want to maintain.
- Press the "Set" button. On some cars, this is a physical button, while on others, it's a stalk you push down.
- The system is now active, and you can take your foot off the accelerator.
Step 3: Adjust and manage your speed
- Increase speed: Press and hold the "Resume" or "+" button to accelerate, or simply press the gas pedal until you reach the new speed and press "Set" again.
- Decrease speed: Press and hold the "Cancel" or "-" button to slow down.
- Cancel cruise control: Press the brake pedal or the dedicated "Cancel" button to temporarily disengage cruise control.
- Resume speed: To return to the previously set speed, press the "Resume" or "RES" button.
What does the cruise control button look like on a Subaru?
And you want to set your speed at 60. Mph. You get your car up to 60.
