How to turn off brake hold on acura rdx?
The brake hold feature on the Acura RDX is a convenient function that automatically holds the brakes when the vehicle comes to a stop, allowing the driver to take their foot off the brake pedal. However, some drivers may prefer to have more control over the braking system and may want to turn off the brake hold feature. Here's how to do it.
Disabling Brake Hold on the Acura RDX
To turn off the brake hold feature on your Acura RDX, follow these steps:
- Locate the brake hold button on the center console of your RDX. It's usually labeled with a "P" icon.
- Press and hold the brake hold button for a few seconds until the indicator light turns off.
- The brake hold feature is now disabled, and your RDX will behave like a traditional vehicle, requiring you to keep your foot on the brake pedal to hold the car in place.
It's important to note that the brake hold feature can be useful in certain situations, such as when you're stopped at a traffic light or in heavy traffic. However, if you prefer a more hands-on driving experience, disabling the brake hold feature can give you more control over the braking system.
Verifying the Brake Hold is Disabled
To confirm that the brake hold feature is turned off, you can check the following:
- The brake hold indicator light on the center console should be off.
- When you come to a stop, you should feel the need to keep your foot on the brake pedal to hold the car in place.
- The vehicle should not automatically hold itself in place when you take your foot off the brake.
If the brake hold feature is still active after following the steps above, you may need to consult your Acura RDX owner's manual or contact your local Acura dealer for further assistance.
How do I turn off auto brake hold?
To turn off the brake hold, simply press the accelerator pedal to release it or press the "Brake Hold" button again. You can also turn it off by firmly depressing the brake pedal and pressing the button simultaneously.
This video demonstrates how to turn on and off the automatic brake hold feature: 58sHondaYouTube · Apr 24, 2023
Method 1: Use the accelerator pedal
- While the brake hold is engaged, press the accelerator pedal.
- The brakes will release, and the hold function will turn off.
- The system will then reset and wait for the next stop.
Method 2: Press the "Brake Hold" button again
- With your foot on the brake pedal, press the "Brake Hold" button a second time.
- An indicator light on the dashboard will turn off, showing the feature is disabled.
This video shows how to turn off the brake hold feature by pressing the brake hold button: 15sHondaYouTube · Aug 7, 2023
Method 3: Firmly press the brake pedal and the button
- While the brake hold is engaged, firmly press the brake pedal.
- While still pressing the brake pedal, press the "Brake Hold" button again.
You can also watch this video to learn how to turn off the brake hold feature by pressing the brake pedal and the button simultaneously: 54sHondaYouTube · Jun 28, 2022
How to turn off parking brake acura rdx?
To release: The power mode must be in ON in order to release the electric parking brake. Depress the brake pedal. Pull the electric parking brake switch up gently and securely. The indicator in the switch goes off.
What is the brake hold on the RDX?
Then you have your parking brake you're going to push it forward to engage it to disengage put your foot on the brake. And click it out towards you.
How do I turn off auto braking on my Acura RDX?
But um at least you wouldn't hit the car at full speed. But some people don't like the intrusion. So if you want to deactivate. It it's on by default.
