How wide is a stock 1955 Chevy rear end?
The standard width of a 1955 Chevy rear end is 60 inches or 5 feet. This measurement refers to the distance between the outer edges of the rear axle housing, which is a key specification for classic Chevrolet vehicles from that era.
Understanding the 1955 Chevy Rear End Dimensions
The 1955 Chevy was a landmark model year for the iconic American car brand, known for its distinctive styling and powerful V8 engines. One of the key technical specifications of the 1955 Chevy is the width of the rear end, which is an important factor in the vehicle's overall design and performance.
The rear end, also known as the rear axle housing, is the component that contains the differential and axle shafts that transmit power from the transmission to the rear wheels. In the case of the 1955 Chevy, the standard rear end width was 60 inches, or 5 feet, across the outer edges of the housing.
This measurement is important for several reasons:
- Wheel and Tire Fitment: The 60-inch rear end width determines the maximum size and width of the rear wheels and tires that can be installed on the vehicle without modification.
- Suspension and Handling: The rear end width affects the vehicle's weight distribution, suspension geometry, and overall handling characteristics.
- Replacement and Aftermarket Parts: When restoring or modifying a 1955 Chevy, the rear end width is a critical specification to ensure compatibility with replacement or aftermarket components.
Understanding the standard 60-inch rear end width of the 1955 Chevy is essential for anyone working on or customizing these classic vehicles.
What is the width of a 1955 Chevy rear end?
Stock 55 - 57 is 60 1/4". I used one from a 1969 Mustang in stock form measuring 59 1/4".
How wide is a 7.5 GM rear end?
Overall width 59.625".
How wide is a 1955 Chevy?
Length : 195.6 in | 4968 mm. Width : 73.0 in | 1854 mm.
How wide is a Chevy 14 bolt rear end?
From wheel mounting surface to wheel mounting surface, there are three widths: Single rear wheel (SRW) has a wheel mounting surface to wheel mounting surface distance of 67.5 inches. Dual rear wheel (DRW) has a WMS to WMS distance of 72 inches. Cab and Chassis has a WMS to WMS distance of 63.5 inches.
What is the width of the rear end of a 1953 Chevy?
Rear end width is 60", not counting fractions of an inch, if any. Measurement is drum to drum, where wheel mounts to drum surface.
How wide is a 12 bolt Chevy rear end?
The 12 bolt drum-to-drum width is supposed to be 62.5 inches according to the Chevy forums and mine measures pretty close to that.
How do you measure rear end width?
Below. If you like this video. Subscribe here for more curry Tech videos.
What's the difference between a 10 bolt and a 14 bolt rear end?
A 14 bolt is a monster of an axle compared to a 10 bolt or 12 bolt – larger housing, larger axle shafts, larger ring gear, etc. If you're doing any serious off-roading, for example, you'll appreciate the upgrade.
How wide is a 57 Chevy truck rear end?
A stock 57 rear end is 60" mounting surface to mounting surface.
How wide is a 1956 Chevy truck's rear end?
55-57 Chevy is 60-1/4". The Camaro will kind of work but it will require 1" more backspacing on the wheels.
