How wide is the bed between the wheel wells on a 2024 Ranger?
The bed width between the wheel wells on the 2024 Ford Ranger is roughly 44.8 inches (about 114 cm). This measurement refers to the distance across the bed floor from one wheel housing to the other, and can vary slightly with accessories such as bed liners or toolbox mounts.
What this width means for loading and cargo planning
Knowing the exact width between the wheel wells helps you assess whether items will fit crosswise in the bed and how to orient loads for transport. The Ranger’s 5-foot bed configuration, common on Crew Cab models, presents a defined constraint: items wider than the wheel wells won’t fit across the bed, while narrower items can be placed between them or along the bed’s length depending on their size and shape.
How Ford defines bed dimensions
Ford publishes bed and interior dimensions in its official specifications, describing the width as the distance between the inner wheel housings at the bed floor. For the 2024 Ranger with the typical 5-foot bed, this width is about 44.8 inches. Minor variations can occur due to trim level, bed liner, or aftermarket accessories, so the figure is best treated as a close estimate for planning purposes.
If you need an exact figure for a specific build, consult the official build sheet or Ford’s product brochure for that model year and bed option.
Before moving to practical examples, note that the following quick references illustrate how the measurement translates to common cargo scenarios.
- A standard pallet (about 40 inches wide) fits between the wheel wells without crossing the bed’s width barrier.
- A typical 4x8 sheet of plywood (48 inches wide) does not fit between the wheel wells when loaded flat in the bed.
- Items wider than about 44.8 inches generally cannot be carried crosswise between the wheel wells and must be oriented along the bed’s length or crosswise with care.
- Bed liners, toolbox mounts, and other accessories can slightly reduce usable width; plan with the widest configuration in mind.
The practical takeaway is that the Ranger’s bed width between the wheel wells sets a hard crosswise limit for many standard large sheets and boards, while narrower items and pallets can be accommodated with careful loading along the bed length.
Additional considerations for Ranger payload and cargo handling
Beyond the crosswise width, factors such as payload capacity, bed length (5 feet), tie-downs, and securing points influence how you load and transport items. Always verify fitment with your specific vehicle configuration, particularly if you have bed liners, installed toolboxes, or aftermarket rails that alter the usable width.
Summary
The 2024 Ford Ranger’s bed width between the wheel wells is about 44.8 inches. This measurement guides crosswise cargo planning, with typical pallets (around 40 inches wide) fitting between the wheel wells, while wider items (near or above 44.8 inches) require lengthwise loading or alternative transport. Always confirm exact figures for your exact build when precision matters, especially if you have accessories that can affect usable width.
