Loading

How wide is the rear axle on a 1965 Falcon?

The rear axle width of a 1965 Ford Falcon is approximately 58 inches or 147 centimeters. This measurement is crucial for understanding the vehicle's overall dimensions, suspension setup, and compatibility with various aftermarket parts and accessories.


Detailed Explanation


The 1965 Ford Falcon was a compact car produced by the Ford Motor Company. It was available in a variety of body styles, including a two-door sedan, four-door sedan, and station wagon. The rear axle width is an important specification that determines the overall stability, handling, and wheel clearance of the vehicle.


According to the information gathered from various sources, the typical rear axle width for a 1965 Ford Falcon is around 58 inches or 147 centimeters. This measurement is consistent across the different body styles and trim levels of the Falcon produced that year.


The rear axle width is a critical factor in the vehicle's suspension design and overall stability. A wider rear axle provides better stability and handling, particularly during high-speed maneuvers or when carrying heavy loads. The 58-inch rear axle width of the 1965 Falcon was a common specification for compact cars of that era, offering a balance between stability and maneuverability.


Importance of Rear Axle Width


The rear axle width of a vehicle is important for several reasons:



  • Stability and Handling: A wider rear axle provides better stability and handling, particularly at higher speeds or when carrying heavy loads.

  • Wheel Clearance: The rear axle width determines the available space for the rear wheels, which is crucial for tire and suspension component clearance.

  • Compatibility with Aftermarket Parts: Knowing the rear axle width is essential when selecting and installing aftermarket parts, such as wheels, tires, and suspension components, to ensure a proper fit.

  • Towing and Load Capacity: The rear axle width is a factor in determining the vehicle's towing and load-carrying capabilities, as it affects the overall stability and weight distribution.


Understanding the rear axle width of a 1965 Ford Falcon is essential for owners, enthusiasts, and mechanics who are working on or modifying these classic vehicles.

What is the width of the rear end of a 1964 Ford Falcon?


Here it is again,64/65 Comet/Falcon 8" rearend is 58 inches wide! You will need to narrow an 8.8 to fit,most people remove the long axle tube and axle and replace it with a second narrow side tube and axle!



What is axle width?


In automobiles (and other wheeled vehicles which have two wheels on an axle), the axle track is the distance between the hub flanges on an axle. Wheel track, track width or simply track refers to the distance between the centerline of two wheels on the same axle.



How wide is the axle on a 65 Falcon?


The 1964 & 65 Falcon and Comets V8's had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.



What is the width of a 1960 Falcon rear axle?


The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.



How much horsepower does a 1965 Ford Falcon have?


For the first time, the 289 cubic inch V-8 motor was available, along with the Cruise-O-Matic Transmission. The 289 engine in stock form had 200 horsepower. The Cruise-O-Matic offered 3 forward automatic gears for the first time in a Falcon.



How wide is a model A rear axle?


56 inches is consided about the average standard width for an early hot rod rear. That's measured wheel mounting surface to wheel mounting surface.



What is the width of a 1963 Falcon rear axle?


A stock 63 falcon V8 is 56 inches, the narrowest 8" ford made. Approximate rear end widths measured from backing plate to backing plate.



How wide is a 1965 Ford Falcon?


Deluxe, 2.8L, Leaded Petrol, 3 SPEED MANUAL

DimensionMetricImperial
Ford Falcon Height1384 mm4 ft 6 in
Ford Falcon Width1778 mm5 ft 10 in
Ford Falcon Length4602 mm15 ft 1 in
Ford Falcon Wheelbase2781 mm9 ft 1 in



What is a 1965 Ford Falcon worth today?


Typically, you can expect to pay around $10,500 for a 1965 Ford Falcon in good condition with average spec. What is the highest selling price of a 1965 Ford Falcon? The highest selling price of a 1965 Ford Falcon at auction over the last three years was $21,000.



How wide is the axle on a 1965 Falcon?


The 1964 & 65 Falcon and Comets V8's had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.