How wide is the Toyota C-HR?
The Toyota C-HR’s width is a key factor for parking, maneuverability, and interior space. In its standard specification, the C-HR is about 70.7 inches wide (1,795 millimeters) excluding side mirrors, with the overall width including mirrors typically falling in the mid-to-high 70s inches, depending on mirror design and market. Market-specific quirks can slightly adjust the published figure, but the 70.7-inch figure is the baseline you’re most likely to encounter.
Official width specifications
Toyota publishes the width excluding mirrors as the primary measurement in most markets. The numbers below reflect that convention and help with parking planning and interior space assessments.
- Width (excluding mirrors): 70.7 inches (1,795 mm).
- Measurement context: This figure is the standard width used in Toyota’s official spec sheets for the C-HR across many regions.
- Note on mirrors: The overall width increases by a few inches when side mirrors are spread out; exact width depends on mirror size and whether mirrors are folded in.
Taken together, these figures provide a baseline for how the C-HR fits into garages and lane widths. When planning parking or urban driving, consider the excluded-mirrors width as the official reference and factor in the mirrors for a practical clearance margin.
Market variations and practical implications
While the baseline width remains around 70.7 inches, some markets report slightly different figures due to measurement conventions or trim differences. Practically, most buyers should rely on the excluded-mirrors width for planning on-roads and in-car logistics, while acknowledging that the actual space occupied with mirrors out will be marginally larger.
- Excluded-mirrors width: generally 70.7 inches (1,795 mm) across the majority of markets.
- With mirrors extended: approximately 75–77 inches (about 1,905–1,960 mm), depending on mirror size and design.
- Important caveat: If mirrors are folded for parking, the width can decrease by a few inches, closer to the excluded-mirrors figure.
For shoppers and drivers, these ranges mean you should measure your usual parking spaces with the mirrors in their typical position and, if possible, in the folded state when negotiating tight spaces. The C-HR’s footprint is compact for its class, but margins matter in urban settings.
Practical tips for parking and interior planning
To translate width into real-world use, consider these quick guidelines and checks when evaluating the C-HR for daily driving or garage setups.
- Before you shop, measure a representative parking space with the mirrors in their usual position to ensure clearance.
- When parking in tight garages, test door swing room for front and rear doors in addition to the vehicle’s width.
- If you frequently fold mirrors for storage or alley parking, remember the width will drop closer to the official 1,795 mm figure.
These checks help ensure the C-HR fits comfortably in your typical urban or suburban environment, balancing its compact footprint with practical drivetrain and cabin space.
Summary
The Toyota C-HR’s standard width is 70.7 inches (1,795 mm) excluding mirrors, with overall width including mirrors typically in the high-70s inches (around 75–77 inches or about 1,905–1,960 mm) depending on mirror design and market. Market-specific adjustments are generally minor, but it pays to verify the exact figures for your region and to assess spaces with mirrors in their usual position. In all cases, the width is a core consideration for parking, lane positioning, and garage compatibility.
