What battery is in a Ford Ranger?
The Ford Ranger typically uses a 12-volt sealed lead-acid battery. Some higher-trim or Start-Stop-equipped versions may use an AGM (Absorbent Glass Mat) battery. This article explains what to expect and how to verify the exact type for your model.
Battery types you may encounter in a Ranger
The Ranger’s electrical system runs on a 12-volt battery, but the exact chemistry can vary by market, year, and equipment level. Here are the common options you might see on the label or in documentation.
- Standard flooded lead-acid (maintenance-free) 12-volt battery
- AGM (Absorbent Glass Mat) 12-volt battery for Start-Stop systems and higher electrical demands
- EFB (Enhanced Flooded Battery) used in some earlier or budget configurations as a middle option
In practice, most newer Rangers with automatic transmissions and modern infotainment expect a maintenance-free 12V battery, with AGM used on models equipped for idle-stop technology.
How to identify your Ranger’s battery type and size
To ensure you purchase the correct replacement, identify the group size, capacity, and chemistry from the battery label and your owner’s manual. Look for these indicators on the battery.
- Group size code (for example, a number like 65, 75, or similar) indicating fitment in the tray and terminals
- Battery chemistry indication such as AGM, EFB, or Flooded
- Cold Cranking Amps (CCA) rating and Reserve Capacity (RC) that meet or exceed OEM specifications
Always cross-check: the exact group size and CCA/RC requirements depend on your Ranger’s engine, drivetrain, and electrical options. When in doubt, bring the old battery or your vehicle VIN to a parts counter for matching.
Tips for confirming with official sources
Consult the owner’s manual for the exact battery specification, or contact a Ford dealer with your VIN to confirm the OEM battery type and replacement requirements.
Steps to replace a Ford Ranger battery safely
Replacing a battery is a straightforward maintenance task if you follow safety precautions and use the correct replacement. Here is a practical sequence to guide you.
- Turn off the engine and remove the keys, then disconnect the negative (-) terminal first, followed by the positive (+) terminal.
- Note the battery's group size, CCA, and RC to select a compatible replacement.
- Remove the hold-down clamp, lift the old battery out, and clean the tray if there is corrosion.
- Install the new battery with the correct orientation of terminals, secure the hold-down, and reconnect the terminals starting with the positive (+) terminal, then the negative (-) terminal.
- Test starting and charging, and reset any electronics or system codes if required by your vehicle.
Always follow the vehicle's safety precautions and wear eye protection and gloves when handling batteries. If in doubt, have a professional perform the replacement.
Summary
The Ford Ranger generally uses a 12-volt sealed lead-acid battery, with AGM variants common on models equipped with Start-Stop systems or higher electrical loads. Verify the exact group size, CCA, and RC on the battery label or in the owner's manual, then replace with a battery that meets or exceeds OEM specifications. Proper handling and installation ensure reliable starts and electrical performance across climate and usage conditions. Note that specifications can vary by market and model year, so checking official documentation or a dealer is advisable.
What group battery is in the 2011 Ford Ranger?
59
Duralast Group Size 59 Battery 59-DL.
What kind of battery does a Ford Ranger take?
A Ford Ranger typically takes a battery from Group 59, 65, 48, or 94R, depending on the year and specific model. It is crucial to verify the correct group size by checking the vehicle's owner's manual or using an online battery finder tool from a reputable auto parts store, as the physical size, terminal location, and electrical requirements can vary.
Common battery groups for Ford Ranger
- Group 59: Often used in older models.
- Group 65: A common size for many Ranger models.
- Group 48 (H6): Frequently seen in more recent models.
- Group 94R (H7): Another size found in many newer Rangers.
How to find the correct battery
- Consult your owner's manual: This is the most reliable source for your specific vehicle.
- Use an online search tool: Many auto parts websites have a tool where you can enter your vehicle's year, make, and model to see compatible options.
- Check the old battery: The group size should be printed on the label of the battery currently installed in your truck.
- Consider battery type: You can choose between traditional flooded batteries or a higher-performance AGM (Absorbed Glass Mat) battery, which is more resistant to vibration and shock.
What size battery group is in a 2007 Ford Ranger?
59 Group Size
DieHard Silver – Battery: 59 Group Size, 2 Year Warranty, 590 CCA, 735 CA, 100 Minute Reserve Capacity (Part No. 59-3)
What type of battery is in a 2019 Ford Ranger?
Duralast Platinum Group Size 94R H7 Absorbed Glass Mat (AGM) Battery H7-AGM.
