What bolt pattern is a 2011 Honda Odyssey?
The 2011 Honda Odyssey uses a 5-lug bolt pattern on a 114.3 mm pitch circle (5x114.3).
Bolt pattern basics
Understanding bolt patterns helps ensure wheels fit safely and correctly. The bolt pattern, or lug pattern, is defined by the number of lug holes and the diameter of the circle that passes through their centers. For the 2011 Odyssey, the standard configuration is five lugs on a 114.3 mm circle, a common spec across many Honda models from that era.
Beyond the bolt pattern, other mounting details matter for a proper fit, including the wheel center bore and the wheel offset. The Odyssey typically uses a center bore of 64.1 mm, and the correct offset varies by wheel design. Verify these specs for any aftermarket wheels you consider.
2011 Odyssey wheel mounting specifications
Before selecting wheels, note the key mounting specifications that influence compatibility beyond the bolt pattern.
- Bolt pattern: 5x114.3 mm (5 lug holes on a 114.3 mm circle)
- Center bore: 64.1 mm
- Common lug nut thread: M12 x 1.5 (verify with your specific wheel and trim)
- Typical offset range: varies by wheel design; check the manufacturer’s spec for exact fit
Concluding: When shopping for wheels, ensure they match the 5x114.3 mm bolt pattern and that the center bore and offset are appropriate for your Odyssey’s wheel design and trim level.
How to verify bolt pattern on your Odyssey
Use these steps to confirm your vehicle’s bolt pattern before purchasing wheels or adapters:
- Check the owner’s manual or the wheel spec placard located on the driver’s door jamb for official bolt pattern details.
- Inspect an installed wheel: count the lug holes (five for this model) and measure the circle diameter that passes through the lug centers.
- Measure the center bore on the hub or the wheel hub opening to confirm it matches 64.1 mm; note that some wheels may require hub-centric rings if the bore is larger.
- Consult a Honda dealer or a reputable tire/wheel shop with your VIN to confirm the exact specs for your specific trim, since there can be minor variations.
- When in doubt, install wheels marketed as 5x114.3 mm compatible with Honda vehicles from the same generation and verify fitment with offset and bore requirements.
Bottom line: Verifying bolt pattern, center bore, and offset helps ensure a safe, proper fit and avoids interference or alignment issues.
Summary
For the 2011 Honda Odyssey, the official bolt pattern is 5x114.3 mm, with a center bore of 64.1 mm. When selecting wheels, verify these specs and confirm offset and lug thread details with the wheel manufacturer or a trusted shop to ensure a safe, proper fit.
What is the bolt pattern on a 2012 Honda Odyssey?
The 2012 Honda Odyssey has a 5x120mm bolt pattern, with 5 lugs and a 120mm bolt circle diameter. This is the correct pattern for this model year, with a center bore of 64.1mm.
- Bolt Pattern: 5x120mm
- Number of Lugs: 5
- Bolt Circle Diameter: 120mm
- Center Bore: 64.1mm
What is the bolt pattern on a 2011 Honda Odyssey?
The 2011 Honda Odyssey has a 5x120mm bolt pattern, meaning it has 5 lug holes and the distance between them is 120mm. This is a key specification to remember when searching for replacement wheels, as any wheel with this bolt pattern should fit.
- Bolt Pattern: 5x120mm (or 5x4.7 inches)
- Lugs: 5
- Hub Bore: 64.1mm
What Hondas have a 4x100 bolt pattern?
Compatibility and Suitability: The 4x100 bolt pattern is predominantly found in compact and subcompact Honda models, such as older Civic models, the Fit, CRX, Insight, Del Sol, Prelude, and City.
What is the bolt pattern on a Honda Odyssey?
The Honda Odyssey bolt pattern is 5x120 for most recent models, but older models have a 5x114.3 pattern. The most recent generations, starting around 2011, use the 5x120 bolt pattern. The earlier generation, roughly 2005-2010, used 5x114.3. Always confirm the correct bolt pattern for your specific vehicle year before purchasing new wheels.
This video explains the wheel and tire specs for a 2010 Honda Odyssey, including its bolt pattern: 1mThe Van DadYouTube · Mar 28, 2022
- 5x120: This is the bolt pattern for most modern Honda Odysseys, roughly from 2011 to the present.
- 5x114.3: This was the bolt pattern for the previous generation of the Odyssey, from approximately 2005 to 2010.
This video shows a Honda Odyssey fitted with BMW rims, which share the 5x120 bolt pattern: 58sWheelin N DealinYouTube · Dec 20, 2022
- How to check: It is essential to confirm the bolt pattern for your specific model year, as there was a change between generations. You can check a reliable source like your vehicle's manual, an online parts catalog, or by physically counting the lug nuts and measuring the distance between them on your current wheels.
