What brake fluid does my Ford Fusion take?
The recommended brake fluid for a Ford Fusion is DOT 3 or DOT 4 brake fluid. This is the type of brake fluid that should be used to top up or replace the brake fluid in your Ford Fusion's hydraulic brake system.
Brake Fluid Specifications for the Ford Fusion
According to the Ford Fusion owner's manual and technical specifications, the Ford Fusion requires the use of either DOT 3 or DOT 4 brake fluid. These are the two most common types of brake fluid used in modern passenger vehicles.
- DOT 3 Brake Fluid: DOT 3 brake fluid is a glycol-ether-based fluid that is hygroscopic, meaning it absorbs moisture from the air over time. It has a lower boiling point than DOT 4 fluid.
- DOT 4 Brake Fluid: DOT 4 brake fluid is also a glycol-ether-based fluid, but it has a higher boiling point and is more resistant to moisture absorption than DOT 3. DOT 4 fluid is the recommended choice for many modern vehicles like the Ford Fusion.
It's important to only use the recommended DOT 3 or DOT 4 brake fluid in your Ford Fusion, as using the wrong type of fluid can damage the brake system components.
Checking and Changing Brake Fluid
You should check your Ford Fusion's brake fluid level regularly, typically every 6 months or 6,000 miles. If the level is low, top it up with new, unopened DOT 3 or DOT 4 brake fluid. The brake fluid reservoir is usually located under the hood.
Ford also recommends changing the brake fluid every 2 years or 30,000 miles to ensure the fluid remains clean and free of contaminants. This helps maintain the proper function and safety of your Ford Fusion's braking system.
