What cars fit the 5x108 bolt pattern?
The 5x108 bolt pattern is most commonly found on European Ford and Volvo vehicles, and on several models from the PSA group (Peugeot and Citroën). If your car is from those brands or shares wheels with them, 5x108 wheels are a good starting point to explore. Always verify your exact year and trim, as fit can vary by model.
In this article, we outline which brands and representative models are known to use 5x108, how to confirm compatibility for your specific car, and practical tips for buying wheels that fit safely and perform well.
Brands and models commonly using 5x108
Below are the brands with historical or current use of the 5x108 pattern, along with representative models. Remember that fit can change with generation, market, and options, so always double-check the exact vehicle specification for your year.
Ford (European models)
- Focus (European market generations)
- Mondeo (European market generations)
- S-Max
- Galaxy
- Kuga
Wheels from these Ford models are commonly found in 5x108 among aftermarket suppliers and are a frequent starting point for upgrades or replacements in European markets.
Volvo
- S40 / V50 (shared platforms)
- C30
- C70
- S60 / V60
- V70
- XC60
Volvo has long used 5x108 on many of its passenger cars, making Volvo a reliable reference point when seeking 5x108 wheels.
PSA Group (Peugeot / Citroën)
- Peugeot 308
- Peugeot 407
- Peugeot 3008
- Peugeot 508
- Citroën C5 II
- Citroën C4 Picasso / Grand C4 Picasso (depending on year/market)
Several PSA-branded cars have used 5x108 in various generations, especially in European markets. Model-year and trim can influence wheel fit, so check the specific variant.
How to confirm fitment for your vehicle
Before you buy, use a structured check to confirm that 5x108 wheels will actually fit your car. The following steps help reduce the risk of misfitment and vibration from incompatible wheels.
- Verify the bolt pattern on your vehicle’s specification sheet or owner’s manual. Ensure it is 5x108 for your exact model and year.
- Check the center bore size. The wheel’s center bore must match or be larger than the hub ring on your car; if it’s larger, you may need hub-centric rings to ensure proper centering.
- Consider brake caliper clearance. Some wheels may rub or require careful attention to spoke design and offset to clear brake calipers.
- Assess wheel width and offset (ET). The width and offset must be compatible with your suspension geometry and do not intrude on fenders, struts, or the brake assembly.
- Confirm stud size and thread pitch. Most European cars use metric threads (often M12x1.5 or similar), but you should confirm for your specific car and wheel.
- Check load rating and overall diameter. Ensure the wheels’ load rating meets or exceeds the vehicle’s requirements and that the overall diameter is appropriate for the tire package you plan to run.
Following these checks helps ensure a safe and reliable wheel installation when opting for 5x108 wheels on a compatible vehicle.
Practical tips for buying 5x108 wheels
Whether you’re shopping new or used, these tips help you avoid common pitfalls and get wheels that fit and perform as intended.
- Use reputable fitment databases or the vehicle’s manufacturer literature to confirm 5x108 compatibility for your exact year and market.
- Prefer wheels with the correct center bore or plan for hub-centric rings if your hub bore is larger than the wheel’s bore.
- Verify the wheel’s offset and width align with your vehicle’s suspension and fender clearance to prevent rubbing or handling changes.
- Inspect the wheel’s condition for cracks, bends, or corrosion, especially when buying used wheels that may have been previously mounted on different cars.
- Consult a wheel and tire professional if you’re unsure about the compatibility of wheels from other brands or generations.
With careful verification, 5x108 wheels from Ford, Volvo, or PSA Group vehicles can be a practical and economical option for replacements or upgrades.
Summary
The 5x108 bolt pattern is predominantly associated with European Ford and Volvo models and with several PSA Group vehicles. If you drive a Ford (European models), a Volvo, or a PSA-brand car, 5x108 wheels are a logical starting point. Always confirm the precise model year, center bore, offset, and brake clearance for your vehicle, and use reliable fitment resources or professionals to verify compatibility before purchasing wheels.
