What does B125 mean on Acura?
The code "B125" on an Acura vehicle refers to the engine oil specification required for that particular model. This code indicates the oil viscosity and performance standards that the engine is designed to use, ensuring optimal performance and longevity.
What is the B125 Oil Specification?
The B125 oil specification is an Acura-specific standard that outlines the required engine oil characteristics for their vehicles. This code denotes that the engine is designed to use a 0W-20 viscosity oil that meets certain performance criteria, such as fuel efficiency, wear protection, and sludge prevention.
The "B" in B125 stands for "Bearing", indicating that the oil must provide adequate lubrication and protection for the engine's bearings. The "125" refers to the oil's performance level, with higher numbers representing more advanced formulations.
Why is the B125 Specification Important?
Using the correct engine oil as specified by the B125 code is crucial for the proper operation and longevity of Acura engines. The oil's viscosity and performance characteristics are carefully matched to the engine's design and components, ensuring:
- Optimal Lubrication: The 0W-20 viscosity oil provides the necessary film strength to reduce friction and wear on critical engine parts, even in cold weather conditions.
- Fuel Efficiency: The low-viscosity oil helps to reduce engine drag, resulting in improved fuel economy.
- Sludge and Deposit Control: The oil's advanced additive package helps to prevent the buildup of harmful deposits and sludge, which can compromise engine performance and reliability.
- Extended Engine Life: By meeting the B125 specification, the engine oil helps to protect against premature wear and failure, contributing to the overall longevity of the Acura engine.
Using a non-B125 approved oil can lead to increased wear, reduced fuel efficiency, and potentially even engine damage over time. It is essential to follow Acura's recommendations and use the specified B125 engine oil for your vehicle.
What is B125 service Acura?
The "B" is to replace the engine oil and filer, as well as a routine inspection of items for wear and tear. The "1" is to rotate the tires. The "2" is to replace the engine air filter, cabin air filter and check the serpentine belt. And the "5" is to replace the engine coolant (anti-freeze).
What does A15 mean on Acura?
Replace engine oil
A15. • Replace engine oil. • Check tire pressure and rotate tires. • Replace engine coolant.
How often should I change the rear differential fluid on my Acura RDX?
every 15,000 miles
If you regularly drive your vehicle under these conditions, have the differential fluid changed at 7,500 miles (12,000 km), then every 15,000 miles (24,000 km).
How much is the Acura B12 service?
Code B12: $334.95 Lube, Oil, Filter, Tire Rotation, Tire Balance, Engine Air, and Pollen Filter Replacement. Code A16: $274.95 Lube, Oil, Filter, Tire Rotation, Rear Diffuser Fluid Replacement.
What is Acura B12 maintenance?
A12 or B12 Maintenance Services
Change engine oil and filter with Genuine Synthetic Acura Motor Oil. Perform Tire rotation. Perform high speed computerized balancing of all 4 tires. Hand torque all wheels. Replace Air filter.
What is Acura B126 service?
B is oil change and inspection. #1 is tire rotation, #2 is engine and cabin filters, and #6 is replace rear dif fluid if equipped.
What is a B125?
The B125 code in any vehicle by the Honda Motor Company means: B = Replace the engine oil and filter. Clean the rear brakes, adjust the parking brake, and perform an inspection of brake hoses, exhaust system, fluids, fuel lines, and other connections.
What does service B125 mean?
Say for example your Honda Civic display reads: SERVICE DUE SOON B125. According to the Honda Maintenance Minder charts (shown) here's what that code means. SERVICE DUE SOON - Your Honda has 15% oil life remaining and it's time to take your vehicle in for its regularly schedule maintenance.
What is Acura Service B125?
The "B125" is a Maintenance Reminder service interval. The "B" is to replace the engine oil and filer, as well as a routine inspection of items for wear and tear.
What are Acura service codes?
What Do The Acura Service & Maintenance Codes Mean?
| Sub Code: | Maintenance Needed: |
|---|---|
| 1 | Tire rotation |
| 2 | Replace air cleaner element, dust and pollen filter and inspect drive belt |
| 3 | Replace transmission fluid |
| 4 | Replace spark plugs, timing belt, and inspect water pump and valve clearance |
