What engine is in a 1990 Dodge Ram?
The 1990 Dodge Ram was equipped with a variety of engine options, but the most common was the 5.2-liter V8 engine. This powerful engine provided ample power and torque for the Dodge Ram's towing and hauling capabilities.
Engine Specifications
The 5.2-liter V8 engine in the 1990 Dodge Ram had the following key specifications:
- Displacement: 5.2 liters (318 cubic inches)
- Horsepower: 170 hp @ 4,000 rpm
- Torque: 270 lb-ft @ 3,200 rpm
- Cylinder Configuration: V8
- Fuel System: Electronic fuel injection
- Transmission: 3-speed automatic or 5-speed manual
This engine was known for its reliability, durability, and strong low-end torque, making it well-suited for the Dodge Ram's intended use as a work truck.
Engine History and Development
The 5.2-liter V8 engine used in the 1990 Dodge Ram was part of Chrysler's long-running LA engine family, which had been in production since the 1960s. This engine was a popular choice for Dodge's full-size trucks and SUVs throughout the 1980s and 1990s, known for its robust design and ability to handle heavy loads.
Over the years, the 5.2-liter V8 underwent various refinements and upgrades to improve its performance, fuel efficiency, and emissions compliance. By 1990, it had evolved into a reliable and capable engine that provided the power and torque needed for the Dodge Ram's intended applications.
Is a 318 a good engine?
In the case of the 318 Mopar, there are rabid fans, but more as admirers of its anvil-like durability than breakneck performance. For most of its production life, the 318 was a bread-and-butter two-barrel economy offering.
How good is the Ram 3.6 V-6 engine?
Yes, the Dodge Ram V6 engine is generally considered a good option, especially for those seeking a balance between power, fuel efficiency, and towing capacity. The 3.6-liter Pentastar V6 offers solid performance, decent fuel economy, and reliability, making it a popular choice for everyday driving and light towing.
How much money does a 1990 Ram truck cost?
The value of a used 1990 Dodge RAM 250 ranges from $1,346 to $9,399, based on vehicle condition, mileage, and options.
What is the 318 Dodge Motor?
In the mid-1960s, Chrysler decided to adapt the 318 cu in (5.2 L) small block V8 into a lightweight, high output engine equally suited for drag strip or street performance use.
What engine is in a 1990 Dodge D150?
Engine
| Base engine size | 5.2 L |
|---|---|
| Cylinders | V8 |
| Base engine type | Gas |
How much is a 1990 Dodge D150 worth?
The value of a 1990 Dodge D150 1/2 Ton can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $14,060 for a 1990 Dodge D150 1/2 Ton in good condition with average spec.
Do Ram trucks hold their value?
The Ram brand does OK, relative to other popular vehicle brands, in retaining its value. However, if you account for the fact that they only have pick-ups, Ram is disappointing, in that the Ram 1500 has one of the worst resale values for half-ton and smaller pick-ups.
What engine does a Dodge D150 have?
1993 Dodge D150 Regular Cab Specs, Features & Options
| 1 of 2 D150 Regular Cab Short Bed | 2 of 2 D150 Regular Cab Long Bed |
|---|---|
| See Pricing See Cars in Stock | See Pricing See Cars in Stock |
| Pickup | Pickup |
| Engine | |
| V8, 5.2 Liter | V8, 5.2 Liter |
How much horsepower does a 1990 Dodge 318 have?
I'm showing 170hp and 230lb ft of torque for your 1990 318. Gotta remember that back then, a truck wasn't a personal statement so much as a work tool. The shift came when the Chevy 454SS, the Syclone/Typhoon, and the Ford Lightning came around in the early/mid 90s.
Is a 318 a big block?
Most commonly known as the "wide-block 318," "big-block 318," or "Poly 318," official Chrysler nomenclature describes it as the A479 or A-series 318.
