What size is the oil drain plug on a 2017 Toyota Tundra?
As a car owner, knowing the specifications of your vehicle is crucial for effective maintenance and repair. One important aspect of vehicle maintenance is understanding the size of the oil drain plug, especially when performing oil changes. In this article, we will explore the oil drain plug size for the 2017 Toyota Tundra, ensuring you have the right tools for your next oil change.
Oil Drain Plug Size for the 2017 Toyota Tundra
The oil drain plug on a 2017 Toyota Tundra is typically a 14mm hex bolt. This size is standard for many Toyota models, making it easier for owners to find compatible tools for oil changes.
Steps to Change the Oil in Your 2017 Toyota Tundra
Changing the oil in your Tundra is a straightforward process if you have the right tools and follow these steps:
- Gather Your Tools: You will need a 14mm socket wrench, an oil filter wrench, a new oil filter, and the appropriate amount of engine oil.
- Prepare Your Vehicle: Park your Tundra on a level surface and turn off the engine. Allow it to cool down before starting the oil change.
- Drain the Old Oil: Place a drain pan under the oil pan, remove the oil drain plug using the 14mm socket, and let the old oil drain completely.
- Replace the Oil Filter: Use the oil filter wrench to remove the old oil filter. Apply a little new oil to the rubber gasket of the new filter before installing it.
- Refill with New Oil: Replace the drain plug and tighten it securely. Then, pour the new oil into the engine using the oil filler cap.
- Check Oil Level: After adding oil, use the dipstick to check the oil level and ensure it is within the recommended range.
By following these steps, you can ensure that your 2017 Toyota Tundra runs smoothly and efficiently. Regular oil changes are essential for maintaining engine health and performance.
Conclusion
Knowing the size of the oil drain plug and how to change your oil can save you time and money. For the 2017 Toyota Tundra, a 14mm hex bolt is required for the oil drain plug. With the right tools and a little know-how, you can keep your vehicle in top condition.
Frequently Asked Questions
What size is the drain plug on a 2018 Toyota Tundra?
Locate the Toyota Tundra engine oil drain plug, located on the right passenger side of the oil pan. Using a 14-millimeter socket and rachet loosen and remove the drain plug and sealing washer in a counterclockwise direction. Allow the old oil to drain into a suitable waste oil drain pan.
How many quarts of oil does a 2017 Toyota Tundra 5.7 take?
7.9 quarts
How much oil does a 2017 Toyota Tundra take? A 2017 Toyota Tundra takes 7.9 quarts of oil.
What size socket for oil change Toyota?
14 mm hex
This is a 14 mm hex for the oil plug.
How to find out oil drain plug size?
Measure Diameter
Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.
What sockets do I need for oil change?
Ratchet and Socket Set
Get a set that includes some metric and SAE sizes, and if you're starting out, a 3/8” drive should do just fine. Ratchets and sockets also come in 1/4, 1/2″, 3/4″, and 1” drives. Many medium sized kits will include ratchets and sockets in 3/8” and 1/2″ drive.
What size socket is a tundra drain plug?
14 mm
Notes: Engine Oil Drain Plug. M12 x 1.25 thread. With 14 mm Head.
What size ratchet do I need for an oil change?
Ratchet and Socket Set
Get a set that includes some metric and SAE sizes, and if you're starting out, a 3/8” drive should do just fine.
What size socket fits an oil drain plug?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
What size is the oil filter wrench on a 2017 Toyota Tundra?
64mm
Oil Filter Wrench for Toyota Camry, Tundra, Tacoma, 4Runner, RAV4 and More - 64mm 14 Flute Precision CNC Machined Aluminum Oil Filter Removal Tool.
What size is Toyota oil filter wrench?
64.3mm 14 Flute Oil Filter Wrench - Fits Toyota, Lexus, Honda.
