What gear ratio does my Ram 1500 have?
The gear ratio of your Ram 1500 pickup truck depends on the specific model and configuration, but a common gear ratio for the Ram 1500 is 3.92:1. This means that for every single rotation of the driveshaft, the rear axle will rotate 3.92 times.
Understanding Gear Ratios
The gear ratio is a critical specification that determines the balance between power and speed in a vehicle's drivetrain. A higher gear ratio, such as 3.92:1, provides more torque and pulling power, which is beneficial for towing, hauling heavy loads, or driving in off-road conditions. However, a higher gear ratio also results in lower top speed and reduced fuel efficiency during highway driving.
Manufacturers often offer different gear ratio options for the same vehicle model to cater to the diverse needs of their customers. For example, the Ram 1500 may be available with gear ratios ranging from 3.21:1 to 3.92:1, or even higher, depending on the trim level, engine, and intended use of the vehicle.
Checking Your Ram 1500's Gear Ratio
To determine the exact gear ratio of your Ram 1500, you can check the following sources:
- Refer to the vehicle's information placard, usually located on the driver's side door jamb or in the owner's manual.
- Consult the Ram 1500 specifications on the manufacturer's website or in the vehicle's brochure.
- Speak with your local Ram dealer or a certified mechanic, who can provide the specific gear ratio for your truck's configuration.
Knowing your Ram 1500's gear ratio can help you understand its performance characteristics and make informed decisions about towing, hauling, or modifying your vehicle to suit your needs.
What is the differential ratio on a Dodge Ram 1500?
Ram has a standard axle ratio of 3.21 on 2X4 trucks and 3.55 on 4X4 trucks and trucks with the diesel engine. However buyers can choose different axle ratios for their Ram 1500, including a 3.92 axle ratio.
Which Ram has 3.92 rear axle ratio in Ram 1500?
2023/2024 Ram 1500 Classic Towing Chart
| 2023/2024 Ram Classic | REG CAB 4X2 | QUAD CAB 4X2 |
|---|---|---|
| 3.92 AXLE RATIO | ||
| RAM 1500 3.0L DIESEL | ||
| 3.55 AXLE RATIO | 8,240 LBS | 8,070 LBS |
| 3.92 AXLE RATIO | 9,210 LBS | 9,070 LBS |
Which is better, 3.21 or 3.92 axle ratio?
The standard 3.21 axle ratio then gets you a maximum tow rating of 8,440 pounds. Go with the 3.92 gearing and the tow rating jumps up to 11,540 pounds — a massive 3,100-pound difference.
How do you find the gear ratio on a Dodge Vin?
Number the VDS is the vehicle documentation. Section on the VIN. The VDS is found in the fourth to eth characters you will find information here about a car's. Model brand and gear ratio.
Can you find gear ratio from VIN number?
You don't. That information is not contained in the VIN, UNLESS a specific model only gets one rear end ratio. VIN tells country of manufacture, vehicle make, class, engine type, size, date of manufacture, plant and serial number. That is the ONLY information contained by the VIN.
What is the best rear axle ratio for RAM?
A 4.10 rear axle ratio is ideal for towing larger 5th Wheel or Gooseneck trailers. FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.
How can I tell what gear ratio I have without pulling cover?
I have my buddy holding the other Tire. I start spinning this and I'm watching the other. One. That's one full rotation right there.
How do I identify my RAM differential?
If the ID tag or stamp is missing or unreadable, differentials can be identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.
What is a 3.92 gear ratio good for?
In terms of capability, the 3.92 gives you a higher max tow rating. The rating isn't particularly important, though. Practically speaking, the tow capacity of 1/2 tons is limited by payload. The advantage of the 3.92 gearing is getting moving when towing.
Which RAM gear ratio is best?
FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.
