What is the best oil for 2010 Honda Crosstour?
The best oil for a 2010 Honda Crosstour is a 5W-20 full synthetic or synthetic-blend engine oil that meets API SN or newer standards and ILSAC GF-5, with Honda Genuine 5W-20 as the preferred reference. This viscosity and quality balance fuel economy with engine protection for the Crosstour’s V6 powerplant.
For this model year, Honda specifies a light-viscosity oil to support efficiency and reliable performance in typical driving conditions. This article explains the official recommendations, practical brand options, and tips for selecting the right oil and maintaining engine health.
Official oil specifications for the Crosstour
The following list summarizes the core specifications to guide your oil selection.
- Viscosity: 5W-20, suitable for all-season use in typical U.S. climates
- Oil type: Full synthetic or synthetic-blend oil
- Standards: API SN or newer; ILSAC GF-5 compliance
- Reference benchmark: Honda Genuine 5W-20 is the preferred standard option
In practice, any 5W-20 oil that is synthetic or synthetic-blend and carries API SN (or newer) andGF-5 compliance will meet the Crosstour’s requirements. Always verify labeling and consult the owner's manual if you are unsure.
Recommended oil brands and products that meet the spec
To simplify shopping, here are widely available 5W-20 oils that meet the Crosstour’s spec and are commonly stocked at U.S. auto shops.
- Honda Genuine 5W-20 (full synthetic or synthetic blend)
- Mobil 1 5W-20 Full Synthetic
- Castrol EDGE 5W-20 Full Synthetic
- Pennzoil Platinum Full Synthetic 5W-20
- Valvoline Advanced Full Synthetic 5W-20
Any of these oils, when labeled as 5W-20 and meeting API SN/SF plus GF-5, will satisfy the Crosstour’s requirements. Always confirm labeling before purchase and avoid oils that don’t carry the correct specs.
Maintenance considerations and best practices
Beyond selecting the right oil, following proper maintenance practices helps maximize the Crosstour’s engine life.
- Change oil every 5,000–7,500 miles with conventional oil; with synthetic oil, intervals can extend toward 7,500–10,000 miles depending on driving conditions and manufacturer guidance
- Replace the oil filter with every oil change
- Check the oil level monthly and after long trips
- Use fresh oil and a new filter; avoid reusing old filters
Sticking to these maintenance principles—paired with the correct oil grade—helps preserve performance and reliability for the Crosstour’s aging V6 engine.
Summary
For a 2010 Honda Crosstour, the best oil choice is a 5W-20 full synthetic or synthetic-blend that meets API SN and ILSAC GF-5 standards, with Honda Genuine 5W-20 serving as the ideal reference. Select a reputable brand that offers 5W-20 full synthetic, follow the recommended service intervals, and always verify the oil label to ensure it matches the Crosstour’s specifications.
What motor oil brand does Honda recommend?
Honda recommends using its own Genuine Motor Oil or any other premium-grade oil that meets the specifications in your owner's manual, such as the API Certification Seal and the correct viscosity (e.g., 0W-20, 5W-30). While other brands are acceptable, using the genuine Honda oil ensures it meets American Honda's engineering standards.
Key recommendations
- Use Honda Genuine Motor Oil: This oil is formulated specifically for Honda vehicles and meets American Honda's engineering standards.
- Check your owner's manual: Consult the manual for the correct oil viscosity (e.g., 0W-20, 5W-30) and specifications for your specific model and year.
- Choose a premium oil: If not using Honda Genuine Oil, select a premium-grade oil that meets the API Certification Seal and the viscosity recommended in your manual.
- Do not use oil additives: Avoid using oil additives, as they can negatively affect engine performance and durability.
What kind of oil does a 2010 Honda Crosstour take?
The 2010 Honda Crosstour requires a 0W-20 full synthetic engine oil. It is important to use the correct oil viscosity grade to ensure proper engine lubrication and protection.
- Viscosity: 0W-20
- Oil Type: Full synthetic
- Capacity: Approximately 4.3 to 4.5 quarts (with filter), but always check the dipstick to avoid overfilling
What type of oil for Honda Crosstour?
Information
| Accord | 2003-2010 L4 & V6: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2011-2020 L4 & V6: 0W-20 (UFS) 2005-2007 Hybrid: 5W-20 (S/UFS) 2014-2020 Hybrid or Plug-in: 0W-20 (UFS) |
|---|---|
| Crosstour | 2010-2015: 0W-20 (UFS) |
| CR-V | 2003-2009: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2010-2020: 0W-20 (UFS) |
| CR-Z | 2011-2016: 0W-20 (UFS) |
Can I use 5W30 instead of 5W20 in my Honda Accord?
You can likely use 5W-30 instead of 5W-20 in your Honda Accord, but you should check your owner's manual first, as the recommended oil can vary by model year and engine. Using a slightly thicker oil is sometimes done for older or high-mileage engines, but it may slightly decrease fuel economy, as the lighter 5W-20 is often specified for better efficiency.
Potential effects of using 5W-30
- Fuel economy: Thicker oil requires more energy to pump, which can lead to a slight reduction in gas mileage.
- Engine performance: Engineers design engines for specific oil viscosities. Sticking to the recommended 5W-20 ensures optimal performance and protection according to the manufacturer's specifications.
- Engine wear: In some cases, using a heavier oil in a high-mileage engine might be beneficial, especially if you're experiencing oil consumption issues. Some mechanics recommend a 5W-30 in older Honda engines to help with this, but it can also increase engine friction if the engine wasn't designed for it.
What to do
- Check your owner's manual: The most important step is to consult your car's owner's manual for the exact oil viscosity recommendation for your specific model and engine.
- Consult a mechanic: If you're concerned about your engine's performance or have a high-mileage vehicle, a mechanic can provide advice tailored to your car's condition.
